Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
Entering the code number: When power is supplied to the unit the display should look like this: Use the station preset keys 1-6 (figure 1 # 7) to enter the 5 digit code. For example, if the code is 63251, press 6 key followed by the 3,2,5 & 1 key. When the entire code has been entered press:(figure 1 # 8)to the right to confirm. (right arrow) If the code is entered incorrectly more than 3 times, the unit will not allow another code to be entered. The display will show: If this happens you must leave the vehicles ignition and radio on for 1 hour. After 1 hour you may re-enter the proper code. RADIO OPERATION Each touch of the FM or the AM button will switch between the available bands and AUTOSTORE memory areas. RDS Display: RDS (Radio Broadcast Data System) allows display of station information on the radio. When RDS information is available it will allow you to access station information and program type (PTY). Note: Not all stations broadcast this data and RDS data is only possible under favorable reception conditions. To activate RDS, press the left button under the RDS option. The radio program type will be displayed for a few seconds. Station keys There are 18 storage positions for FM stations and 12 for AM stations. These keys also function as a direct CD selection when this radio is used with the optional CD changer. To program a station to a preset button, tune to the station and hold the preset button you would like to store the station for approx. 3 seconds. Repeat for other presets. Station or Title search These keys are used for radio tuning and CD search operation. Radio Mode: Each press of the search mode keys change increases or decreases the channel frequency. CD Mode: Each press of the search mode keys will fast-forward or rewind the current track of the CD. The Scan function will search the available stations about every 10 seconds. Press to turn on the Scan on or off. Random CD (shuffle) Mode Press the left key to turn the random play mode on/off. Use this button to switch the CD on and also switch between the CD player and the optional CD changer. Audio adjustment Pressing the center button selects the bass, treble balance and fader adjustments. The +, - buttons adjust the levels. To reset all levels to center press the center button for more than 2 seconds. The display will show: To mute the volume press the left key when this is in the display. To turn off the mute press the left key again. Telephone operation When a factory installed BMW telephone is connected to this radio the radio will automatically mute when a call is received or placed. The radio will display: Care For cleaning use a cloth very lightly moistened with water. The display will be damaged with use of any chemicals or cleaners. DO NOT USE PROTECTANTS LIKE ARMOR ALL™ OR OTHER BRANDS ON THE DISPLAY. Connections Figure 2 1. Main antenna connection 2. Diversity antenna connection 3. Connection for CD changer AI 4. Connector for: Pin# 1. L/F+ 2. R/F+ 3. L/R+ 4. ...
Dieses Handbuch ist für folgende Modelle:Car-Receiver - CD43 (212.15 kb)
Car-Receiver - CD43 (212.15 kb)
Car-Receiver - CD43 (212.15 kb)
Car-Receiver - CD43 (212.15 kb)