Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
The values that are declared in the markings on your product or in the printed documents accompanying are obtained in a laboratory environment according to the related standards. These values may vary according to the usage of the product and environmental conditions. 4 EN Warnings | • This product is designed for household usage. • Your washing machine is adjusted to 230 volts. Your machine may not operate with low voltage. • If the current value of the fuse at your home is less then 16 amperes, consult a qualified electrician and have a fuse of 16 amperes installed. • When using with or without a transformer, make sure that the grounding installation is made by a qualified electrician. When used without grounding, our company shall not be responsible for the possible damages. • In order to make your machine ready to use, call Authorized Service and if your clean water installation and water drains are not proper, call a qualified plumber. • Your machine should not be placed on a rug covered floor. Otherwise, electrical parts may overheat since your machine will not be able to take air from the bottom. This may lead to the machine malfunction. • While installing the machine, make sure that the hot and cold water taps are connected correctly. Otherwise, your laundries may come out hot in the end of washing process and worn out. • When the supply cord/plug of the machine is damaged, you must call the authorized service. • Make sure that the water inlet hoses are new. Do not use worn out/used water inlet hoses again. It may cause stains to remain on your laundries. • Before washing the clothes that are pretreated with cleaning agents (gasoline ether, liquid stain remover and etc.) rinse thoroughly with clean water. • Never wash the device with a water hose! There is a risk of electric shock! Before cleaning, always disconnect the electricity connection by unplugging. • Never touch the plug with wet hands. Never grab from the cable but from the plug when unplugging. • If the power cable or the plug is damaged, or the appliance shows any other errors, do not operate the appliance! • For the failures that can not be solved by applying the information given in these operating instructions: Turn off the machine, unplug it, close the water tap and contact with the customer service center. Never try to repair the machine by yourself. • When you operate your washing machine for the first time, use Cotton 90o program with detergent without loading the machine with laundry in order to make it ready for washing your laundry. After washing the very dirty clothes such as the working clothes of a car technician, it is recommended to repeat the machine cleaning process. • The performance of your washing machine depends on the compound effect of the machine, water and the cleaning agent that is used. If poor and unqualified cleaning agents are used, stains on your laundries will be stabilized. Before washing the stained laundries, pay attention to clean them as described in the following pages. • Your machine is designed to resume its operation when the power restores after a power failure. You can not cancel the program by pressing On/Off button. When the power restores, the machine will resume from the point it stopped. • During the production, some water may have remained in your machine because of the quality control processes. It does not cause any damage to your machine. • Plug must be accessible after installation. • The repair or change of main plug should be carried out by authorized technicians or specialists. • Main water pressure should be between 1 - 10 bars. 5 EN Things to do Before Calling the Authorized Service If the light of the 1st auxiliary function on the left hand side is flashing It is in the child-lock mode. (See. Child-lock) If the cover and washing light on the program follow-up indicator is flashing and the end light is constantly on The program selection knob may be in-between position. Readjust the program by turning the program selection knob. If the warning continues, contact the authorized service. If the light of Start/Pause/Cancel button starts to flashing after a short time you start your machine The door may not be properly closed. Open and close the door again and restart the washing program. If the “Washing” light on the program follow-up indicator is flashing The water may be cut or the taps may be closed. Check the taps. Turn off your machine and restart. If the fault persists, unplug your machine, close the taps and contact the authorized service. If the program can not be started or selected Machine may be in the self-protection mode due to the substructure problems (grid voltage, water pressure and etc.) Therefore, you can not start or select a program. Press Start/Pause/Cancel button for 3 seconds and return the machine to the factory settings. (See.Cancelling a Program) If the water is cut while your machine is operating, the current program does not proceed. To continue the progr...
Dieses Handbuch ist für folgende Modelle:Waschmaschinen - 2112 CX (249.22 kb)