These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can

Play the TRACK 2 part. • Because the part already recorded in TRACK 1 is played back automatically, you can play the TRACK 2 part in time with it. • Recording will also begin if the START/STOP button is pressed. In this case recording begins after a one-measure count. 6. When you have completed recording the TRACK 2 part, press the RECORD button to turn it off. □ 16 ■ More about SEQUENCER recording • Expressed in terms of notes, the total number of notes which can be recorded in both SEQU

• When the TEMPO/PROGRAM indicator is lit, the TEMPO/PROGRAM dial cannot be used to adjust the tempo. • To adjust the tempo during playback, refer to page 68. TAP TEMPO You can set the tempo of the rhythm by tapping this button few times with your finger at the tempo you wish to play. TAP TEMPO • The tempo at which the button is tapped is detected, and the tempo automatically changes correspondingly. Playing the rhythm 45 QQTG0665 Part II Playing the rhythm Playing the rhythm DEMO SPLIT POINT MA

buttons to change the respective touch settings. • Use the TIME . and . buttons to specify the time change depending on touch. Use the LEVEL . and . buttons to specify the pitch change level depending on touch. • At a – setting, the softer the keys are pressed, the greater the change. At a + setting, the harder the keys are pressed, the greater the change. 4. Change the key follow settings for the ATTACK (ATK), DECAY (DCY) and RELEASE (RLS). • Use the . and . buttons corresponding to the ENVELOP

Polish may be used, but do not use thinners or petro-chemical-based polishes. • A wax-based polish may be used on the cabinet, although you will find that rubbing with a soft cloth will suffice. SAVE THESE INSTRUCTIONS 3 How to use 1 Plug the power cord into the wall socket. Install the music stand (included). • Insert it into the two holes. Turn on the POWER button. POWER ■.OFF .»ON □ (Left side of keyboard) • The indicator lamp at the left on the front of the piano lights up when

А CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Л CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. BEFORE YOU PLAY, PLEASE READ THE CAUTIONARY COPY APPEARING ON PAGE 2. ik A The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to th

Press the YES button to execute the function, or press the NO button to cancel the function. • Note that if the END command is included in the source data, it is also copied. Any data following the END command is not copied. 98 QQTG0618 Part IV Sequencer MEASURE ERASE Erase the recorded contents of specific measures. You can also specify which type of data is to be erased. • Note that only the contents of the measures are erased, not the measures themselves; the length of the performance

For optimum performance and safety, please read these instructions carefully. Contents Technical specifications..................................................2 Suggestions for safety......................................................3 Front panel controls............................................................4 Accessories................................................................................4 Connections............................ ....................5 Receiving radio broa