Stimmen - 2, Durchschnittliche Bewertung: 5 ( )

Hersteller: Technics Dateigröße: 4.66 mb Dateiname: SXPR604.pdf Unterrichtssprache:

buttons to change the respective touch settings. • Use the TIME . and . buttons to specify the time change depending on touch. Use the LEVEL . and . buttons to specify the pitch change level depending on touch. • At a – setting, the softer the keys are pressed, the greater the change. At a + setting, the harder the keys are pressed, the greater the change. 4. Change the key follow settings for the ATTACK (ATK), DECAY (DCY) and RELEASE (RLS). • Use the . and . buttons corresponding to the ENVELOPE KEY FOLLOW attributes to adjust the settings. Use the CENTER . and . buttons to select the center of the bend direction. Filter Edit Make major changes to the sound by eliminating specific frequency ranges. Sound Edit FILTER & EQUALIZER 1. On the SOUND EDIT menu, select FILTER. • The display looks similar to the following. 2. Use the buttons to the left of the display to select a tone. 3. Use the MODE button to select the filter mode. LPF(6)+EQ (low-pass filter + equalizer) Signals higher than the cut-off frequency are cut. Normal sounds are softened. HPF(6)+EQ (high-pass filter + equalizer) Signals lower than the cut-off frequency are cut. Normal sounds are sharpened. LPF24 (low-pass filter 24) A stronger low-pass filter than LPF+EQ. HPF24 (high-pass filter 24) A stronger high-pass filter than HPF+EQ. BPF (band-pass filter) Cuts off signals that are not within in the area between the two specified CUTOFF frequencies. • For this mode, adjust the settings on the EQUALIZER/FILTER side as well. THRU No filter effect is applied. 4. Use the CUTOFF . and . buttons to set the frequency range which is cut by the filter. 5. Use the RESO . and . buttons to specify the resonance value (dB). • Resonance is effect which adds character to the sound by emphasizing the harmonic components of frequencies close to the cut-off frequency. 114 QQTG0665 Part IX Sound Edit For LPF(6)+EQ/HPF(6)+EQ filters, the sound quality can be modified by the EQUALIZER. RANGE Select the setting range (HIGH or LOW). FREQ Set the standard frequency. GAIN Set the level increase or decrease from the value set for FREQ (dB). 6. Repeat steps 2 to 5 for each tone, as desired. TOUCH & KEY FOLLOW Adjust how the filter is applied relative to touch and pitch. 1. Use the PAGE buttons to view the 2/4 display. • The display looks similar to the following. 2. Use the buttons to the left of the display to select a tone. 3. Use the FILTER TOUCH . and . buttons to modify how the respective filters are applied relative to key touch. • Use the CUT OFF . and . buttons to specify the amount of change in the cut-off frequency. Use the CURVE . and . buttons to specify the curve of change. Use the RESO . and . buttons to specify the degree of change in the resonance value. 4. Use the FILTER KEY FOLLOW . and . buttons to modify how the respective filters are applied relative to note pitch. • Use the SLOPE . and . buttons to adjust the bend slope. Use the RANGE . and . buttons to specify the pitch rang...

Herunterladen

Geben Sie zwei Ziffern: