Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Roland Dateigröße: 2.11 mb Dateiname: Unterrichtssprache:

You could therefore record a new part straight away. (If all tracks already contain data, Track 1 will be selected.) You can, however, also substitute an already recorded part with a new version. (1)Press the [REC..] button. (2)Press FAMILY [v][®] to select “ Single”. (3)Use the SELECT [v][®] buttons to select the track you wish to record to. You can only select one track at a time (hence the name “Single”). If you select a track that already contains data, your new version will overwrite the existing one. (4)If necessary, assign the desired Tone to the part you are about to record (see p. 28) . If you select track [10] , you can select Drum Kits Tones. Track 10 is reserved for Note: If you use the Single recording mode a Standard MIDI File recorded with another sequencer, track 16 (or any other track defined as “second drum track”) may also use a Drum Kit that can be Note: Even though the Main part can be used for recording tracks in Single mode, the MFX only applies to track/4. (5)Press [START.STOP] to start recording. After a two-measure count-in (see p. 38) , you will hear all parts that have already been recorded. Start playing (and recording) your new part. (6)Press [START.STOP] to stop recording. (7)Return to step (3) to record additional parts. Punch I/O In this mode, you can re-record part of a track (the second chorus, for example). The important aspect of this mode is that newly recorded material does not erase the material before or after the passage you redo. Original track This passage is redone By contrast, in Single mode, the entire track you record is replaced by your new material. (So if you don’t play anything during recording, the entire track will be empty afterwards.) Like the Single mode, Punch I/O can only be selected if the E-200/E-100’s memory already contains song data. (1)Press the [REC..] button. (2)Press FAMILY [v][®] to make the display look INTRO FULL BAND = 1 ORCHESTRATOR BEAT PunchI/O 120 001 The flashing track icon (only one) depends on the first that already contains data. In the above example, track contains data, which is why its icon flashes. (3)Use the SELECT [v][®] buttons to select the track you wish to record to. SELECT You can only select one track at a time. (4)Press [START.STOP] to start playback of the (old) song data. The RECORD icon and the icon of the selected track flash. (5)When the Recorder reaches the measure where you wish to start recording, press [REC..] again. The RECORD icon now lights steadily. (6)Play the passage you want to redo. (7)Press [REC..] again to deactivate recording. Song playback still continues, so… (8)Press [START.STOP] to stop playback. (9)Press [START.STOP] to listen to the new version. If you are not satisfied, return to step (3) above. Return to step (3) to correct another track. 24 Using a footswitch Using a footswitch • Connect an optional DP-2, DP-6, or BOSS to the FOOTSWITCH socket on the E-200/E-• Press the [FUNCTION] button (it must light). FUNCTION • Use FAMILY [v][®] to select “ KB SET”. The E-200/E-100’s Function parameters are divided into 9 logical “families”. For the following, we need to select the group that contains the global keyboard settings. • Use SELECT [v][®] to select the “FSW” parameter. SELECT Sustain Note: See also “Working with the FAMILY and SELECT buttons” (p. 17). • Use the [NO/–] / [YES/+] buttons to select “ Punch I/O”. • Press [SONG] to return to the recording function. • Continue with step (1) under “Punch I/O”. In steps (5) and (7), press the footswitch (rather than the [REC..] button). 25 r E-200/E- 100 r E-200/E- 100 8. Additional functions Apart from the basic Music Style functions covered on page 13 and following, your E-200/E-100 also provides the following functions. Most of the following functions are only available after ARRANGER pressing the [ARRANGER] button (the icon must be displayed). One Touch (OTP) The One Touch function automates quite a few tasks: • Suitable Reverb and Chorus settings. • The E-200/E-100 selects sounds for the Main, Split and parts that are is suitable for the selected Style. There are 2 One Touch memories per Style with different settings for the above parameters. Here is how to select one: (1)Select the desired Music Style (see p. 14). If the Arranger is stopped, the E-200/E-100 also loads the corresponding OT1 memory. (2)Press the [OTP1/OTP2] button. OTP1 OTP2 The number field in the upper left corner reads “OT2” (second One Touch memory). Piano 2 If the DATA ENTRY [TONE] button lights, the display now shows a Tone name. (3)Press the [OTP1/OTP2] button again if you need “OT1” again. Note: One Touch is also available for Flash and disk Styles, but it is less meaningful. Using the Music Assistant Another practical function for quickly making the right settings for a song you want to play is to take advantage of E-100’s novel MUSIC ASSISTANT function. It prepares everything for working with the Arranger (Style, Tones, effects, etc.). The Music Assistant is not ava...

Herunterladen

Geben Sie zwei Ziffern: