Stimmen - 3, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
This option is recommended for fast tuning when supported by your cable operator. If the "Quick Scan" does not tune, please use the "Full Scan" method below. "Full Scan" : All available channels are tuned and stored. This procedure may take some time. This option is recommended when "Quick Scan" is not supported by your cable provider. For further information about supported cable providers, refer to support web site: 3 Press G/g/f to select “Start”. The TV starts searching for channels. Do not press any buttons on the TV or remote. ~ • Some cable providers do not support “Quick Scan”. If no channels are detected using “Quick Scan”, perform “Full Scan”. Start-up 7 GB Adjusting the viewing angle of the TV Adjusting the viewing angle of the TV (only for KDL-40/32NX5xx) Adjust the angle left and right (swivel) Top view Front (only for KDL-22EX3xx) Adjust the tilt 0. 8. 8. Detaching the Table- Top Stand from the TV ~ • Do not remove the Table-Top Stand for any reason other than to wall-mount the TV. Table-Top Stand Table-Top Stand (only for KDL-22EX3xx ) z • Be sure the TV is on the vertical position before switching on. TV set must not be powered on with LCD panel face down to avoid uneven picture uniformity. 8 GB SafetyInformation SafetyInformation Install and use the TV set in accordance with the instructions below in order to avoid any risk of fire, electrical shock or damage and/or injuries. Installation • The TV set should be installed near an easily accessible mains socket. • Place the TV set on a stable, level surface. • Only qualified service personnel should carry out wall installations. • For safety reasons, it is strongly recommended that you use Sony accessories, including: – Wall-mount bracket SU-WL500 (KDL-46EX4xx, KDL-40BX4/EX4/ EX6/NX5xx, KDL-37EX4xx, KDL32BX3/ BX4/EX3/EX4/EX6/NX5xx) – Wall-mount bracket SU-WL100 (KDL-26EX3xx, KDL-22EX3xx) • Be sure to use the screws supplied with the Wall-mount bracket when attaching the mounting hooks to the TV set. The supplied screws are designed so that they are 8 mm to 12 mm in length when measured from the attaching surface of the mounting hook. The diameter and length of the screws differ depending on the Wall-mount bracket model. Use of screws other than those supplied may result in internal damage to the TV set or cause it to fall, etc. 8 mm - 12 mm Screw (supplied with the Wall-mount bracket) Mounting Hook Hook attachment on rear of TV set Transporting •Before transporting the TV set, disconnect all cables. • Two or three people are needed to transport a large TV set. • When transporting the TV set by hand, hold it as shown on the right. Do not put stress on the LCD panel. • When lifting or moving the TV set, hold it firmly from the bottom. • When transporting the TV set, do not subject it to jolts or excessive vibration. • When transporting the TV set for repairs or when moving, pack it using the original carton and packing material. Ventilation • Ne...
Dieses Handbuch ist für folgende Modelle:Fernseher - KDL-32BX300 (1.08 mb)
Fernseher - KDL-32BX400 (1.08 mb)
Fernseher - KDL-40BX400 (1.08 mb)
Fernseher - KDL-22EX302 (1.08 mb)