Stimmen - 4, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Fellowes Dateigröße: 508.82 kb Dateiname: ds4107.pdf Unterrichtssprache:

-Press the oilpump button 3 x. -After lubrication let the machine run several times backwards and forwards alternately. -If tank (8) is empty refill with oil. Type of oil: cutting head oil 3.6 Replacing the plastic bag (IDEAL 4107) Replace bag when “bag full“ indicator lights. -Open the door (9). -Pull out the plastic bag holding the bottom of the bag. -Push down the waste paper. -Pull out the waste bag with frame (10) until it stops. -Remove the round belt (11) from the waste bag frame. -Tie the bag (for sealing parts and binding wires see accessories). -Place a new bag into the bag frame (10) and turn the edge over the outside of the frame. -Fasten the bag with the round belt. The round belt must fit into the channel of the bag frame. -Push the bag frame into the machine and adjust the plastic bag with your foot. -Close the door (9). 9 10 IDEAL 4107; IDEAL 4109 3.7 Operation of baler (IDEAL 4109) Eject bale when the white control lamp shows Danger! Do not stand behind the bale ejecting guard during baling. .. Danger of being crushed. Bale ejection - Release safety slide (1). (Pull backwards and turn to the right). Danger! Do not stand behind the bale ejecting guard during baling. .. Danger of being crushed! - Hold bale ejecting guard (2) with the left hand. - Swing locking lever (3) with right hand nearly into horizontal position . . . . . . until the cam locks into positon (Pressure in the baling chamber decreases). - Hold bale ejecting guard (2) with the left hand and swing locking lever (3) with the right hand into basic position. 1-800-658-8788 - 11 - Hold bale ejecting guard (2) with the left hand and swing locking mechanism (4) with the right hand into vertical positon . . . . . . until securing bushing (5) locks into position. - Swing down bale ejecting guard (2). - Press green button (6) until the pump motor switches off. .. bale is ejected. - Remove clamping (7) and swing out clamps (8) and (9). IDEAL 4107; IDEAL 4109 IDEAL 4107; IDEAL 4109 - - -While removing the plastic bag push down the remaining paper. Place pressed bale on the floor. Danger! Do not reach into the hopper. ..Danger of getting cut! Tie bales or seal with locking device. (for sealing parts and binding wires see accessories). -Press ball knob (10) for approx. 2 secs. ..Piston reverses for a short distance. Danger! Do not reach under the cover sheet (11). ..Danger of getting cut! -Stand upon the bale ejecting guard (12). -Slide new plastic bag (13) over the bale hopper. -Swing in clamps (8) and (9) and secure on tension rod (7). -Press ball knob (10) for approx. 2 secs. ..Piston reverses for a short distance. -Swing up bale ejecting guard (4). 12 1-800-658-8788 -13 Close bale - Push up locking bush (5) and swing down locking mechanism (4). - Slightly open the bale ejecting guard (2) with both hands until the lug (14) is above the locking catch (15). - Hold bale ejecting guard with the left hand. Swing locking lever (2) with the right ...

Herunterladen

Geben Sie zwei Ziffern: