Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: ABC Office Dateigröße: 508.82 kb Dateiname: Unterrichtssprache:

Danger! Incorrect exchanging of connections may endanger the operator. If in doubt, this work should be performed by an electrical specialist. 6 1-800-658-8788 -3. Operation Danger! The machine may only be operated by persons who have read and understood the operating instructions. Danger! Do not reach into the running shredding mechanism! The shredding mechanism may cause serious injury! Danger! The machine will only run when the door is closed. 3.1 Operating elements IDEAL 4107 (1) Start (2) Stop (3) Reverse switch and lamp showing “bag full“ (4) Key switch (5) Standby (6) Mains switch (7) Emergency off 3.2 Operating elements IDEAL 4109 (1) Start (2) Stop and lamp showing “baler full“ (3) Reverse switch and lamp showing “paper jam“ (4) Key switch (5) Standby (6) Mains switch (7) Emergency off 3.3 Starting the machine Danger! Do not shred any material which may loop or splinter. In case of danger, press emergency off button (7). -Turn mains switch (6) to position “ I “ -Emergency off (7) must be unlocked (turn to the right) -Turn key switch (4) on. .. Standby (5) illuminates. -Press and release the black button (1). -Conveyor belt is running. Distribute the paper over the total width of the conveyor belt. 7 IDEAL 4107; IDEAL 4109 IDEAL 4107; IDEAL 4109 Machine stops due to overloading -Remove any paper left on the conveyor belt. Do not reach behind the flap. -Press and release the yellow key (3) ..Conveyor belt reverses. -Feed less paper onto the conveyor belt. -Start afresh. Machine stops and yellow lamp (3) lights (IDEAL 4109) -Wait until the yellow light goes out. -Start a fresh, press black button. -Wait until the baler is working and feed less paper onto the conveyor belt. ..........Warning! Avoid continuous overloading of the machine. Stopping the machine -Press white button (2) or emergency off (7) Do not reach into the running shredding mechanism! 3.4 Switching off the machine For short breaks: -Press white button (2) ..Conveyor belt stops, baler remains in automatic mode. For longer breaks: -Turn main switch (6) to position “0”. ..The entire machine shuts down. -Turn key switch (4) and remove the key ..Now the machine is secured from unauthorized use. 8 1-800-658-8788 -3.5 Oiling the shredding mechanism If the sheet capacity reduces or after “bag full“ we recommend that you oil the shredding mechanism. -Press the oilpump button 3 x. -After lubrication let the machine run several times backwards and forwards alternately. -If tank (8) is empty refill with oil. Type of oil: cutting head oil 3.6 Replacing the plastic bag (IDEAL 4107) Replace bag when “bag full“ indicator lights. -Open the door (9). -Pull out the plastic bag holding the bottom of the bag. -Push down the waste paper. -Pull out the waste bag with frame (10) until it stops. -Remove the round belt (11) from the waste bag frame. -Tie the bag (for sealing parts and binding wires see accessories). -Place a new bag into the bag frame (10) and turn...

Herunterladen

Geben Sie zwei Ziffern: