Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
• Only use attachments/accessories specifi ed by the manufacturer. ] Portable Cart Warning Power is fed to the unit even when it is not functioning. To cut the power supply off, the power cable must be unplugged. Important battery precautions • Any battery may present a risk of fi re, explosion, or chemical burn if abused. Do not try to charge a battery that is not intended to be recharged, do not incinerate, and do not puncture. • Non-rechargeable batteries, such as alkaline batteries, may leak if left in your product for a long period of time. Remove the batteries from the product if you are not going to use it for a month or more. • If your product uses more than one battery, do not mix types and make sure they are inserted correctly. Mixing types or inserting incorrectly may cause them to leak. • Discard any leaky or deformed battery immediately. They may cause skin burns or other personal injury. • Please help to protect the environment by recycling or disposing of batteries according to federal, state, and local regulations. Ecology Help protect the environment - we recommend that you dispose of used batteries by putting them into specially designed receptacles. Service information This product should be serviced only by those specially trained in appropriate servicing techniques. For instructions on how to obtain service, refer to the warranty included in this user manual. For your records In the event that service should be required, you may need the model number and the serial number. In the space below, record the date and place of purchase and the serial number: Model No.: Date of Purchase: Place of Purchase: Serial No.: Technical information Product: Voice activated clock radio Brand: RCA Model: RC50 Electrical consumption Power Supply: 120V ~ 60Hz Power Consumption: 5 Watts Modifi cations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la class B est conforme a la norme NMB-003 du Canada. Illustrations contained within this publication are for representation only and subject to change. The descriptions and characteristics given in this document are given as a general indication and not as a guarantee. In order to provide the highest quality product possible, we reserve the right to make any improvement or modifi cation without prior notice. OFF – turn off the unit. ON (RADIO) – turn on the radio. REV – set clock or wake time (decrease value). FWD – set clock or wake time (increase value). WAKE 1 MODE – select Wake 1 mode. WAKE 2 MODE – select Wake 2 mode. SET – Enter setting mode for setting clock time, Wake 1 time or Wake 2 time Front view Top view Side view –VOLUME+ – adjust volume. BAND – select between AM and FM bands. TUNING – select radio frequencies. SLEEP – activate sleep function. Back view Voice recognition mode This unit recognizes voice commands.To switch on the voice recognition mode, press the VOICE RECOGNITION button on the rear panel of the unit. The blue Voice recognition indicator on the front of the unit will then be lighted. You can use below voice commands to control the unit. Demo mode To activate the Demo mode, press and hold the SNOOZE button for a while. A voice message will guide you to fi nish the setting without memorizing a series of commands. Alternatively, you can use the default voice commands to control the unit. Refer to the next section for details. SNOOZE – when alarm is on, enter snooze mode where the alarm will quiet but sound again once the snooze period is over; press once to read out the time; press and hold for a while to activate Demo mode. Microphone and Voice recognition indicator Functions To start using the Voice recognition mode Provides the current time Set the clock time Tells you the current alarm time Set alarm 1 or alarm 2 with voice commands Turn off the alarm Set sleep time Offers a help menu for assistance Voice Commands Wake up sleepy head Time Set time Alarm Set alarm Turn off the alarm Sleep Help • Remember to use the voice command “Wake up sleepy head” before using all other voice commands. • The unit will not response to a command when the radio is turned on, when the alarm is sounding or when the unit is sounding. Turning off the wake alarm or radio • To silence the wake function momentarily: To turn off the wake function, press SNOOZE on the top of the unit. The wake alarm or radio will be switched off temporarily. The alarm or radio will be on again when the snooze period (9 minutes) is over. • To turn off the wake alarm or radio: Press OFF. The wake alarm or radio will activate again the next day unless you switch off the Wake function. • To disable the wake function completely: Press WAKE MODE repeatedly until no wake mode indicator ( , or , ) lights. Disabling the wake function 1. Press VOICE RECOGNITION at the back panel of the unit to switch on the function if the bl...