567 669 The orbital sander was invented by Festool and the RS2E is the hidden champion of our line of sanders. The RS2E is a /2 sheet orbital sander with a fine, 2.5mm stroke and a real workhorse Unfortunately / sheet sanders have become more and more unpopular in recent years in the woodworking industry. They have been replaced by the widely used random orbital sander. Though random orbital sanders have a number of advantages, you can't beat / sheet sanders for smoothing out and finishing l

N/A x N/A Shipping Dimensions: Type.............................................................................................................................................................Cardboard Content....................................................................................................................................................Not Available Weight.......................................................................................................................

Any time you are unsure about which grit to begin with, experiment in a small corner or area that isn’t very noticeable on your project. Ideally, you want to achieve the balance of removing defects without damaging your work. ALUMINUM OXIDE and SILICON CARBIDE abrasives are an excellent choice because they last longer and are sharper than natural abrasives. Attaching Abrasives Abrasive sheets are easily attached with the hook-and-loop system on the pad of your G9907 sander. Fit the sheet over th

The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures. Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injur

Wear the appropriate protection during use! Introduction This rolling-pin style pneumatic drum sander is perfect for hand contouring and smoothing projects that are too large to use with a stationary sander. Simply chuck the 3/8" spindle into a portable electric drill, cordless drill or air powered drill for two-handed control. Choose this 4" x 1V8" diameter size for getting into tight areas. Features ball bearing handle and air valve for easy bicycle pump inflation. Inventory A. Drum Sander

Use a bicycle pump (or other manual pump) MODEL REF PART # DESCRIPTION to inflate the drum until the sanding sleeve is G1970 1 P1970001 RUBBER DRUM 3" secure. Do not exceed the 10 PSI maximum 2 P1970002 VALVE STEM rating. 3 PFH08 FLAT HD SCR 10-24 X 1/2 4 P1970004 10 PSI MAX. LABEL 5 P1970005 AIR COMPRESSOR LABEL Awarning G1971 1 P1971001 RUBBER DRUM 4" EXPLOSION HAZARD! 2 P1971002 VALVE STEM N I? J ■< 3 PFH08 FLAT HD SCR 10-24 X 1/2 Do not use an air compressor

of strokes 10 000 - 19 400 spm Abrasive stroke 2.5 mm (0.1 in.) Weight 1.5 kg (3.3 lbs.) Safety UL 745, CSA C22.2 No. 745 Symbols V Volts A Amperes Hz Hertz W Watt ~ Alternating current n0 No load speed Class II Construction rpm Revolutions per minute spm strokes per minute O Diameter Intended use The Deltex sander can be used to smooth wood, plastics, metal, steel, composite materials, paint- lacquers, filler, stopper and similar materials. Thanks to the triangular shape of the sanding pad the