Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
Use a bicycle pump (or other manual pump) MODEL REF PART # DESCRIPTION to inflate the drum until the sanding sleeve is G1970 1 P1970001 RUBBER DRUM 3" secure. Do not exceed the 10 PSI maximum 2 P1970002 VALVE STEM rating. 3 PFH08 FLAT HD SCR 10-24 X 1/2 4 P1970004 10 PSI MAX. LABEL 5 P1970005 AIR COMPRESSOR LABEL Awarning G1971 1 P1971001 RUBBER DRUM 4" EXPLOSION HAZARD! 2 P1971002 VALVE STEM N I? J ■< 3 PFH08 FLAT HD SCR 10-24 X 1/2 Do not use an air compressor 4 P1970004 10 PSI MAX. LABEL I%v3> to inflate the sanding drum! 5 P1970005 AIR COMPRESSOR LABEL Over-inflation will cause the bladder to explode, resulting in personal injury and/or tool damage G1972 1 P1972001 RUBBER DRUM 6" 2 P1972002 VALVE STEM 3 PFH08 FLAT HD SCR 10-24 X 1/2 4 P1970004 10 PSI MAX. LABEL 5 P1970005 AIR COMPRESSOR LABEL Operation Tips • Adjust the pressure in the drum to fine-tune If you need help with your new pneumatic too1, its firmness for sanding contours. cal1 our Tech Support at: (570) 546-9663. • Always hold the workpiece firmly—the soft surface of the drum will exert more force on the workpiece than a traditional sanding drum. • Deflate the drum when not in use. -2- G1970/G1971/G1972 Pneumatic Sanding Drum...