6. Always use 2 hands during use. 7. WARNING! All accessories for this tool must be rated for at least 6500 RPM. Grinding wheels and other accessories running over their rated speed can fly apart and cause injury. 8. Use only 9” diameter grinding wheels having a 5/8” or ( 7/8” if using included arbor adaptor) center mounting hole. Never disable or modify the wheel guard. 9. WARNING! Never install a carbide tipped or steel circular saw blade for use in this tool. Never install a wood carving blad

17. Do not force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. 18. Do not use the power tool if the Power Switch does not turn it on or off. Any tool that cannot be controlled with the Power Switch is dangerous and must be replaced. 19. Disconnect the Power Cord Plug from the power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce th

This will clean the surface, leave no residue and assure a secure bond. Pressing Magnetic Switch ON will 5. start the Sander. OFF will stop the Sander. When using the Disc Sander, always 6. use the LEFT side of the sanding disc (as you face it) to sand. The sanding disc turns counterclockwise and using the right side could cause kickback. Use two hands and hold workpiece 7. securely at all times. Always maintain a maximum of 1/16” 8. clearance between the Table (69) and sanding disc. When finish

It generates a slight humming sound. The motor becomes hot to the touch. This is normal. 1. Make it accessible. You will need to open it daily, in some cases. 2. Locate it near a power outlet. It must be located in an open area that is away from any flammable materials. Do not use the Rotary Tumbler outdoors. 3. Do not put the tumbler on a table. The vibration of the unit may cause the tumbler to crawl when placed on a smooth slippery surface. 4. Only use the tumbler in an extremely safe locatio

For technical questions please call 1-800-444-3353 SPECIFICATIONS ITEM DESCRIPTION Body Construction Body: Formed and Stamped Sheet Steel Finish Black Powder Coat Overall Dimensions 34-1/4”H X 15-3/4”L X 12-3/8”W Top Mounting Holes 3/8”W X 2-3/4”L (6X Slotted Holes) Base Mounting Holes 308” Dia. (4X) Lower Shelf 13-3.8” X 12-3/8” Middle Shelf 12-1/8” X 12-3/8” Top Shelf 10-5/8” X 12-3/8” Top Dimensions 12-7/8”W X 10”L X 1-7/8”H Overall Weight 47 Lbs. SAVE THIS MANUAL You will need the manual for

The bearings within are sealed and do not require lubrication. Mounting Sanding Disc Remove Table (59) surrounding Sanding Disc (23). Peel off old Sanding Disc. Align perimeter of new Sanding Disc (23) over Aluminum Disc (22). When aligned, press disc firmly onto Disc. Most Sanding Discs have self-adhering properties. Others may require application of an appropriate glue (not supplied). Replace Table (59). Sanding Belt Replacement Push the Belt Tension Lever (34) to the right to loosen the Belt

1. After you have put on the appropriate safety gear covered on page 3 of this manual, and you have installed the sanding sleeve you want to use, plug in the Sander. 2. Turn the sander on using the Switch (80). Always run the Sander for a few seconds before contacting the work piece. 3. Contact the work piece with minimal pressure. If the Spindle Sander is not removing enough material, try a coarser grit sanding sleeve. Keep a firm grip on the stock material as you move the stock material into t

9. Make sure there are no foreign objects, such as nails, in your workpiece. 10. Don’t use dull or damaged bits. Dull or damaged bits may break off and cause serious injury. Replacement accessories are available at Harbor Freight Tools. 11. After changing bits or accessories, make sure the collet is securely fastened. 12. Any accessory used with this tool must be rated at 16,250 RPM or greater. Unpacking When unpacking, check to make sure the parts listed on page 6 and 8 are included. If any par

This feature helps prevent unauthorized use of the Sander. (See Figure L.) 2. Insert the Switch Key (21) into the ON/OFF Locking Switch (22). (See Figure L.) 3. To turn the Sander on, place your finger under the left side of the ON/OFF Locking Switch (22) and pull out. (See Figure L.) 4. To turn the Sander off, push in on the left side of the ON/OFF Locking Switch (22). (See Figure K.) 5. To lock the ON/OFF Locking Switch (22) in its OFF position, push and hold the left side of the Switch while

/ Camarillo, CA 93011 Copyright © 1996 by Central Purchasing Incorporated. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Central Purchasing Incorporated. For technical questions and replacement parts, please call 1-800-444-3353. CHICAGO HEHIlHPowTToobl INDUSTRIAL SPECIFICATIONS Item # 31309 I AmpsA/olts I 5.5 Amps /120 VAC [ Power 660 Watts I No load speed 10000 RPM Weight 6-