Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
OMM141979 J9 J9 Mechanical Tiller 30-Inch OPERATOR’S MANUAL North American Version Litho in U.S.A. INTRODUCTION Thank You for Purchasing This Product We appreciate your business and wish you many years of safe and satisfied use of your machine. Using Your Operator’s Manual This manual is an important part of your machine and should remain with the machine when you sell it. Reading your operator’s manual will help you and others avoid personal injury or damage to the machine. Information given in this manual will provide the operator with the safest and most effective use of the machine. Knowing how to operate this machine safely and correctly will allow you to train others who may operate this machine. Section in your operator’s manual are placed in a specific order to help you understand all the safety messages and learn the controls so you can operate this machine safely. You can also use this manual to answer any specific operating or servicing questions. A convenient index located at the end of this book will help you to find needed information quickly. The machine shown in this manual may differ slightly from your machine, but will be similar enough to help you understand our instructions. RIGHT-HAND and LEFT-HAND sides are determined by facing in the direction the machine will travel when going forward. When you see a broken line arrow (------>), the item referred to is hidden from view. Special Messages Your manual contains special messages to bring attention to potential safety concerns, machine damage as well as helpful operating and servicing information. Please read all the highlighted information carefully to avoid injury and machine damage. CAUTION: Avoid injury! ! This symbol and text highlight potential hazards or death to the operator or bystanders may occur if the hazards or procedures are ignored. IMPORTANT: Avoiddamage!!Thistextisusedto tell the operator of actions or conditions that might result in damage to the machine. NOTE: General information is given throughout the manual that may help the operator in the operation of the machine. Introduction PRODUCT IDENTIFICATION Record Identification Numbers Mechanical Tiller 30-Inch Serial No. (010001 -) If you need to contact an Authorized Service Center for information on servicing, always provide the product model and serial number. You will need to locate the identification number for the machine and for the engine. Record the information in the spaces provided below. M96308 A DATE OF PURCHASE: DEALER NAME: DEALER PHONE: SERIAL NUMBER (A): Product Identification TABLE OF CONTENTS Safety ..........................................................................................1 PreparsVehicle ...................................................................................4 Installing.........................................................................................5 Removing........................................................................................9 Operating...................................................................................... 12 Service.........................................................................................17 Troubleshooting ..................................................................................23 Storage.........................................................................................24 Assembly .......................................................................................25 Specifications....................................................................................29 Index...........................................................................................30 Allinformation,illustrationsand specificationsinthismanualarebased onthelatestinformationatthetimeof publication.Therightisreservedto makechangesatanytimewithout notice. COPYRIGHT©1999 Deere&Co. JohnDeereWorldwideCommercialand ConsumerEquipmentDivision Horicon,WI Allrightsreserved PreviousEditions COPYRIGHT© OMM141979 J9 -English TableofContents SAFETY CAUTION (B) Understanding The Machine Safety Labels The machine safety labels shown in this section are placed in important areas on your machine to draw attention to potential safety hazards. On your machine safety labels, the words DANGER, WARNING, and CAUTION are used with this safety-alert symbol, (). DANGER identifies the most serious hazards. The operator’s manual also explains any potential safety hazards whenever necessary in special safety messages that are identified with the word, CAUTION, and the safety- alert symbol, (). WARNING (A) M74570 A M74608 AVOID INJURY FROM ROTATING KNIVES • Keep hands, feet and clothing away. M74608 M74626 B AVOID INJURY FROM LOSS OF BRAKING OR STEERING • Install ballast per Operator’sManual. CAUTION (C) C M74568 M74608 AVOID INJURY • READ OPERATOR’SMANUAL • Ballast power unit per operator’smanual. • Know location and function of controls. • Keep all shields in place. • Stay clear of power driven parts. ...