Stimmen - 5, Durchschnittliche Bewertung: 4.2
(
)
)
|
Anleitung Zusammenfassung
It may cause affect the performance. This appliance contains fluid (refrigerant, lubricant)and is made of parts and materials which are reusable and/or recyclable. All the important materials should be sent to the collection center of waste materialand can be reused after rework (recycling). For take back, please contact with thelocal agency. O Installation /9\ Warning Remove lower cover Remove the freezer compartment door Remove the refrigerator door Pass the refrigerator Door removal Electric Shock Hazard Disconnect electrical supply to refrigerator before installing. Failure to do so could result in death or serious injury. If your access door is too narrow for the refrigerator remove the refrigerator door and pass the refrigerator laterally. Remove the lower cover by lifting upward. 1) Loosen the hinge cover screws and remove the cover. 2) Remove the keeper by rotating it to counter clockwise (®) and then lifting the upper hinge up( (2)). Lower cover 3) Remove the freezer compartment door by lifting it upward. 1) Loosen the hinge cover screws and remove the cover. Remove connection wire,if any, except for the earth line. 2) Remove keeper by rotating it clockwise (®) and then remove the upper hinge by lifting it up ((D). 3) Remove the refrigerator compartment door by lifting it up. Pass the refrigerator laterally through access door as shown in the right figure. O Installation If the height of freezer compartment door is different from the height of Refrigerator compartment door After leveling the door height Next Door replacement Mount them in the reverse sequence of removal after they pass through the access door. Height adjustment If the freezer compartment door is lower than the refrigerator compartment door If the freezer compartment door is higher than the refrigerator compartment door Level the door by inserting flat(-type) driver into the groove of the left height adjusting screw and rotate it clockwise( ®). Level the door by inserting flat(-type) driver into the groove of the right height adjusting screw and rotate it clockwise( ®). Height difference Height difference When the freezer door does not align with the height of the refrigerator door Even if the height can not be aligned by using the height adjustment screw, insert the transparent sheet supplied with the product. • Separate the door with the lower height, use the (+) type screwdriver to unscrew the screw at the bottom hinge as shown at Figure ® , insert the transparent sheet between the bottom hinge and the bottom bracket, and then fix it with the screw as shown at Figure ® . • Insert more transparent sheets enough to align the height. (4 sheets ard supplied in total.) The refrigerator doors will close smoothly by heightening the front side by adjusting the height adjusting screw.If the doors do not close correctly,performance maybe 1. Wipe off all dust accumulated during shipping and clean your appliance thoroughly. 2. Install accessories such as the ice cube box, cover evaporating tray, etc., in their proper places. They are packed together to prevent possible damage during shipping. 3. Connect the power supply cord (or plug) to the outlet. Don't double up with other appliances on the same outlet. Operation Starting When your refrigerator is first installed, allow it to stabilize at normal operating temperatures for 2-3 hours prior to filling it with fresh or frozen foods. If operation is interrupted, wait 5 minutes before restarting. Adjusting the temperatures and functions Refreshment Center Button Refreshment Center Optional Function display board Type-1 —O FREEZER —O EXPRESS FRZ. _nn°c 00°c OO °F uu °F DiS| Display Power Saving Mode Type-2 ) EXPRESS FRZ. (?§/ Ö REFRIGERATOR Display Power Saving Mode NOTE • Your model may not include every option. O Operation How to adjust the temperature in the freezer compartment How to adjust the temperature in the refrigerator compartment Express freezer (Applicable to some models only) Lock (Applicable to some models only) Door open alarm Self-diagnosis (fault detection) function Display Power Saving Mode This function places the display into power saving mode until the next time the door is opened. Press the FREEZER and EXPRESS FRZ. buttons simultaneously and hold them for 5 seconds until the Ding sounds. All LED/LCDs will then turn ON, then OFF. When the power saving mode is activated, the display will remain off until the next time the door is opened. Then, it will come on whenever a door is opened or a button is pressed and remain on for 20 seconds after the last door opening or button selection. To deactivate the power saving mode, press the FREEZER and EXPRESS FRZ. buttons simultaneously and hold them for 5 seconds until the Ding sounds. You can adjust temperature of and freezer room and refrigerator room. FREEZER o ► Optional Type-1 Type-2 . lQ^ MAX FRZ.TEMP (J MIN Middle(-1 TO-» Middle strong(...
Dieses Handbuch ist für folgende Modelle:Kühlen - GR-B207WVQA.CSEQUKR (18.46 mb)