Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
Keep this manual in a convenient place for quick and easy reference. Study it carefully. You have purchased a dependable and sturdy spreader, but only by proper care and operation can you expect to receive the service and long life designed and built into it. Sometime in the future your spreader may need new parts to replace those that are worn or broken. If so, go to your dealer and provide him with the model and part number. Customer Information Name _______________________________________________ Purchased From ______________________________________ Date Purchased ______________________________________ Model No. ___________________________________________ Serial No. ___________________________________________ It is the purchaser and/or operator’s responsibility to…. • ..........Read and understand the information contained in this manual. • ..........Operate, lubricate, assemble and maintain the equipment in accordance with all instructions and safety procedures in this manual. • ..........Inspect the equipment and replace or repair any parts that are damaged or worn which under continued operation would cause damage, wear to other parts, or cause a safety hazard. • ..........Return the equipment or parts to the authorized King Kutter dealer, from where it was purchased, for service or replacement of defective parts that are covered by warranty. (The King Kutter Factory may inspect equipment or parts before warranty claims are honored.) • ..........Payment of all costs incurred by the dealer for traveling to or transporting the equipment for warranty inspection and or claims. CONTENTS ITEM PAGE General Information.................................................6 Technical Data ..........................................................8 Safety Information....................................................9 Operating Instructions...........................................13 Safety Decal's And Locations ............................... 14 Spreader Use & Adjustments ................................ 15 Hopper Loading ..................................................... 18 General Maintenance ............................................. 20 Lubrication ............................................................. 21 Replacement Parts ................................................. 22 Warranty .................................................................. 24 INFORMATION ON THE MACHINE The models in this manual have been designed and made exclusively allowing the distribution of solid, granular fertilizers and seeds in the field. Their use is particularly made for gardening and golf courses but can be used in many more places. These machines are usually used in daylight. If you need to use the spreader at night or poor visibility, you must use the lighting system of your tractor or some other source to operate safely. A use different from described above is considered improper. Any modification made to the machine relieves the manufacturer from any responsibility of damages or injury that can be caused to operators, third parties, objects or the spreader. NAME PLATE On the hopper of every spreader is a nameplate,which has the model number, serial number and bar code of your machine. When parts are required, it is necessary to refer to the plate for the model of spreader. CHARACTERISTICS OF THE SPREADER The pull type spreader has a fertilizer distributor made of stainless steel, a spreader disc with (4) adjustable vanes with (4) different settings, in order to obtain the maximum spreading precision and uniformity in the distribution, depending on the material to be spread. The feeding of the disc is by gravity through an opening located at the bottom of the hopper, inside of which a mix/agitator is applied, in order to prevent formation of lumps in the fertilizer. A plate is put in front of the disc to prevent the speading to the front side of the machine. The fertilizer delivery is controled by properly opening the shutters in the hopper bottom, through locking devices operated by levers. The fertilzer spreader and the agitator are connected through a gearbox with the wheels, so the speed of the disc is proportionate to the speed of the machine. The switching off and on of the spreading disc is made by putting or removing the split pin on the axle. The machine is connected with a ball hitch 1-7/8”. There is an adjustable tongue so the height can be adjusted to keep the spreader parallel with the ground. The hardness of the steel welded frame, together with the remarkable life of the hopper, helps to obtain a highest quality level of the pull type spreaders. The painting is made by an epoxy varnish with successive backing at 150 degrees celsius with the application of the primer bath, assuring great protection and long life of the machine. A. REGULATING LEVER B. HOPPER C. DISTRIBUTOR VANES D. SPREADER DISC E. STEEL FRAME F. TIRES G. ROD FOR TONGUE ADJUSTMENT H. TONGUE I. 1-7/8” BALL HITCH TECHNICAL DATA S...