Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
Power tools are dangerous in the hands of untrained users. e. Check Damaged Parts - Before further use of the appliance, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other condition that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless indicated elsewhere in this manual. f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g. Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. h. Do not operate a chain saw that is damaged, improperly adjusted, or is not completely and securely assembled. Be sure that the saw chain stops moving when the trigger is released. i. Use extreme caution when cutting small size brush and saplings because the slender material may catch the saw chain and be whipped toward you or pull you off balance. j. Carry the chain saw by the front handle with the saw stopped, finger off the switch, the guide bar and saw chain to the rear. k. Maintain Chain Saw With Care - Inspect chain saw cords periodically and if damaged, have repaired by authorized service facility. Keep cord clear of the chain and operator at all 3 479970-00 LP1000 9/14/05 1:00 PM Page 4 times. Never carry saw by the cord or pull it to disconnect from receptacle. Keep cord from oil and sharp edges. Inspect extension cords periodically and replace if damaged. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Keep handles dry, clean, and free from oil and grease. 5. Service a. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. b. If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his agent in order to avoid a safety hazard. Additional safety instructions for theAlligatorTM Lopper WARNING: Never use the tool above shoulder height. Always position yourself out of the path of falling branches and debris. WARNING: Do not use this tool to fell trees. - Pre-plan a safe exit from falling branches and debris. Ensure the exit route is clear of obstacles that would prevent or hinder movement. Remember wet grass and freshly cut bark is slippery. - Be aware of the direction that a branch may fall. Consider all conditions that may affect the direction of fall, including: - The intended direction of fall. - The natural lean of the branch. - Any unusual heavy limb structure or decay. - Surrounding trees and obstacles including overhead lines. - The wind speed and direction. - The safe distance between a branch and debris to be felled bystanders, buildings and other objects is at least 2 1/2 times length of the branch. Any bystander, building or object within this distance is at risk from being struck by the falling branch. - When cutting a limb that is under tension be aware of spring back. When the tension in the wood fibres are released the spring loaded limb may strike the operator and/or throw the tool out of control. - Always wear suitable safety equipment such as non-skid heavy-duty shoes, goggles, ear protection and gloves when operating the tool. - Ensure someone is nearby (at a safe distance) in case of an accident. - Do not attempt to operate the tool when in a tree, on a ladder or standing on any other unstable support. - Keep proper footing and balance at all times. - Hold the tool firmly with both hands when the motor is running. - Keep handles dry, clean and free from oil and grease. Greasy oily handles are slippery causing loss of control. - Do not let the moving chain contact any object at the tip of the guide bar. - Keep your saw chain properly tensioned. Check tension at regular intervals with the motor stopped and cord disconnected. - Begin and continue cutting only with the chain moving at full speed. - Watch for shifting branches or other forces that could close a cut and pinch or fall into the chain. - Use extreme caution when re-entering a previous cut. Engage spikes on lower jaw into wood and allow the chain to reach full speed before proceeding with cut. - Use of this tool for operation different to those intended could result in hazardous situations. Cut wood only. Don't use this tool for purposes not intended - for example - Don't use tool for cutting plastic, masonry or non-wood building materials. - If any debris gets caught with...
Dieses Handbuch ist für folgende Modelle:Gartengeräte - Alligator LP1000 (1.08 mb)