Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
2.) FUNCTION (TAPE-POWER OFF/RADIO/CD ) Selector Switch. 3.) Carrying Handle. 4.) CD door. 5.) AC Cord Socket (Back Cabinet). 6.) Battery Compartment (Back Cabinet). 7.) FM Telescopic Antenna. 8.) TUNING Control. 9.) BAND (FM STEREO/FM/AM) Selector Switch. 10.) FM STEREO Indicator. 11.) Dial Pointer. 12.) Cassette Control keys. (PAUSE / STOP-EJECT / F.FWD DD / REW / PLAY / RECORD ) 13.) CD door OPEN Button. 14.) BEAT CUT Switch. 15.) PHONES (Stereo Headphone) Jack. 16.) CD Track LCD Display. 17.) CD REPEAT Button. 18.) Speakers. 19.) CD FWD.Skip Search Button. 20.) CD PLAY/PAUSE Button. 21.) Cassette door. 22.) CD STOP Button. 23.) CD REV.Skip Search Button. 24.) CD PROGRAM Button. 7 PD6517_B010703.p65 7 7/1/2003, 15:23 OPERATING INSTRUCTIONS LISTENING TO THE RADIO 1.) Move the FUNCTION selector to the RADIO position. 2.) Move the BAND selector to the desired band, FM STEREO, FM or AM. 3.) Tune to your desired station with the TUNING control. If you have set the BAND selector to FM STEREO and you tune to a FM Stereo station the FM STEREO LED Indicator will light. 4.) Set the VOLUME control to the desired level. 5.) When you are finished listening move the FUNCTION selector back to the TAPE (POWER OFF) position to shut the power ‘Off’and extend the battery life. Antenna Information AM TheAMantennais insidethecabinet. IF AM reception is unsatisfactory try rotating the entire unit until you find the position that provides the best reception. FM Vary the direction of the FM antenna to find the position that provides the best reception. NOTE: If you are listening to a weak FM Stereo station you can usually improve the reception by moving the BAND selector from the FM STEREO position to the FM position, however the sound will now be mono. 8 PD6517_B010703.p65 8 7/1/2003, 15:23 PLAYING COMPACT DISCS Note: Although this portable CD player can read CD-R and CD-RW discs, in addition to normal CDs, the playability of CD-R and CD-RW discs may be effected by the type of software that was used to create the discs, as well as the quality and condition of the blank media you are using. 100% playability cannot be guaranteed. This is not an indication of a problem with the player. NORMAL PLAYBACK 1.) Move the FUNCTION selector to the CD position. 2.) Open the CD door by pressing the OPEN button on the top panel. If you have not already removed the white transit card from the CD player, please remove it now. 3.) Place your CD on the center spindle with the printed label side facing up. Close the CD door. The player will read the Table of Contents and the display will show the total number of tracks on the disc. If the disc is damaged or up side down, display shows “––” 4.) Press the CD PLAY/PAUSE button to begin playback on Track 1. The PLAY Indicator appears in the display . • To skip to higher or lower numbered tracks during playback press the FWD or REV button repeatedly until the desired track number appears in the display. Playback will begin on the selected track. • To search rapidly forward or backward during playback to locate a specific portion of a track, depress and hold the FWD or REV button. The player will search rapidly forward or backward as long as the buttons are depressed. Normal speed playback will resume when the buttons are released. • To Pause momentarily during playback press the PLAY/PAUSE button again. The sound stops and the PLAY Indicator flashes, however the disc continues to spin. To cancel Pause and resume normal playback press the PLAY/PAUSE button once more. Normal playback resumes and the PLAY Indicator stops flashing. 5.) Adjust the VOLUME control as desired. 9 PD6517_B010703.p65 9 7/1/2003, 15:23 6.) To Stop playback at any time press the CD STOP button. The disc stops and the display again shows the total number of tracks on the disc. After the last track has played the disc stops automatically and the display again shows the total number of tracks on the disc. 7.) Open the CD door, remove your disc, and close the CD door again. 8.) Move the FUNCTION selector to the TAPE (POWER OFF) position to shut the power ‘Off’. TO START PLAYBACK FROM A SPECIFIC TRACK Insert your disc in the player, close the door, and wait until the display shows the total tracks. Press either the or button until the desired track number appears in the display, then press the PLAY/PAUSE button to begin playback on that track. REPEAT PLAYBACK You can program the player to repeat either a single track or all tracks on the disc continuously. The Repeat feature can be activated while the disc is playing or while the disc is stopped. One Track Repeat Press the REPEAT button once. The REPEAT Indicator appears. Select the track you wish to repeat with the or buttons and then press the PLAY/PAUSE button. The selected track will be repeated continuously. To cancel One Track Repeat press the STOP button once. ALL Tracks Repeat Press the REPEAT button twice. The REPEAT ALL Indicator appears. Press the PLAY/PAUSE button to begin ...