Stimmen - 2, Durchschnittliche Bewertung: 3 ( )

Hersteller: Unigreen Dateigröße: 967.17 kb Dateiname: GB_manual_Master.pdf Unterrichtssprache:

9 CIRCUIT DIAGRAM .............................................................................................. 16 TABLE 4-5 TABLES OF DELIVERY OF NOZZLES FOR HAND LANCES ...................... 17 TABLE 8 PROBLEMS, CAUSES AND SOLUTIONS .......................................................... 18 TABLE 7 TABLE OF PROGRAMMED MAINTENANCE .................................................... 18 TAB.10 ALLOWED FITTINGS ........................................................................................... 19 Composite handbook, consult the specific files on the various components Thank you for having chosen UNIGREEN. The product you purchased has been designed and built with the greatest attention to the safety of the operator and the environment, nevertheless there are still some residual risks due to the nature of the product used. For this reason we recommend reading all of this manual to avoid making mistakes in the first period of use and to get the most out of the working life of the sprayer in time, doing the programmed maintenance at regular intervals. 1 USING AND KEEPING THE USE AND MAINTENANCE MANUAL The manual is an integral part of the machine and should be kept in a safe place where it can be reached easily for consultation. 1.1 COMPOSITION OF THE MANUAL This manual consists of various parts to make it easier to consult by subject and to avoid repetitions; the following are part of the manual: a) pump handbook b) pressure regulator handbook (manual or electric) c) spraying computer handbook (if fitted) d) optional accessories handbooks (marker, premix, cardan shaft, etc.) UNIGREEN reserves the right to make changes to the manual without prior warning and the normal printing cycles may vary slightly. 1.2 GUARANTEE The enclosed card indicates the conditions of the UNIGREEN guarantee.The UNIGREEN guarantee covers the repair or replacement of parts considered manufacturing flaws, according to the unquestionable judgement of UNIGREEN, only after the authorised agent for that zone has verified the fault. Ambit of the guarantee The guarantee doesn’t cover cases of normal wear, negligent use, poor maintenance and/or improper use. The following materials subject to normal wear are not covered by the guarantee: gaskets and seals, diaphragms, seal rings, tubes and pipes, nozzles, pressure gauges, oil, tyres, friction material of the clutches. Evident cases of negligence include: work speed over that indicated in the spraying tables in the handbook (or too high for the conditions of the terrain), use of herbicide booms without an auto-levelling system or with the auto- levelling system blocked, power-takeoff speed over 540 rpm. Mounted sprayers: activation of the three-point elevator with cardan shaft engaged and power-takeoff operational. And anything else indicated in the present Use and Maintenance Manual. Maintenance: The guarantee is void if the maintenance indicated in the tables in this manual isn’t respected, regarding the period and deadline of the interventions, washing the machine and the circuit at the end of the treatment. Improper use: The use the UNIGREEN machines are designed for is indicated in this manual, any other use is forbidden and makes the guarantee void. 1.3 PRODUCT RESPONSIBILITY UNIGREEN spa is not responsible if: a) During the working life of the machine the normal maintenance operations aren’t performed and documented as indicated in this handbook, in the enclosed handbooks of the pumps-motors-regulators-etc. and in any case as is customary for the normal maintenance of mechanical machinery. b) The machine is equipped with non original accessories or components or parts that aren’t acknowledged by UNIGREEN as their own. c) The machine is equipped with original accessories or components that are unsuitable in the measurements, weight or version for the same. Please consult the page of available and recommended fittings. d) Not following the instructions in the manual whether totally or partially. e) Modifications made to the machine that haven’t been authorised by UNIGREEN. 1.4 WARNING SIGNS IN THE MANUAL AND ON THE MACHINE Below you will find all of the pictograms on the machine, in order to illustrate the warnings, the prohibitions and the correct method of use. The operations that require particular attention are shown in the images beside the text. 21 63 4 5 87 129 10 11 1413 1815 16 17 21 21 63 4 5 87 129 10 11 1413 1815 16 17 21 2 SAFETY REGULATIONS AND RESIDUAL RISKS In relation to safety, the following terms will be used: Dangerous zones: any zone inside and/or near the machine where the presence of a person exposed constitutes a risk for the safety and health of the same person. Person exposed: any person who has their body or any part of their body in a dangerous zone. Before starting the machine, the operator must check for any visible faults in the safety devices and the machine itself. Never start the machine until you have told anyone in the range of action of the...

Herunterladen

Geben Sie zwei Ziffern: