Pin 1 Pin 6 5.8 AutoDome Camera or Receiver/Driver Site Configuration Follow the standard installation instructions provided with the AutoDome Camera or Allegiant Series Receiver/Driver unit for setting device address and connecting the data cable to the unit. Video signals from the camera site are NOT associated with this product. The video signal(s) from the camera site(s) should be connected to an appropriate viewing monitor or other video processing equipment (switcher, PC video capture card

If another connection type is required, an interface cable can easily be constructed using the supplied 9-Pin D connector. The supplied power supply provides power to the LTC 8786 Series unit. Introduction 2 UNPACKING This electromechanical equipment should be unpacked and handled carefully: ¦ LTC 8786/50 or LTC 8786/60 Data Converter unit. ¦ Power supply adapter. ¦ 1.8m (5.75) power supply cable with bayonette plug. ¦ Subminiature 9-Pin D connector. ¦ Four (4) adhesive backed rubber feet. If an

Although various connection options are possible, typical applications are described in the sections that follow. Use whichever application is most suitable to your configuration. Typical configuration diagrams are included in this manual for reference. 5.4 PC RS-232 Interface Using a 9-Pin Connector In this application, the LTC 8786 is connected directly to the serial port of a PC. The user-supplied software installed on the PC must be designed to output "Receiver/driver and AutoDome RS-232 Con