Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
If multiple clocks are selected, all the selected clocks downloaded will be the one copied to this folder. If a report is created from these files using the utility, any transaction file in the folder will be included in the report (see Figure 5-21). See the status window in Figure 5-21 for an example of configuration file download. Clear Transactions: clear all sync transactions stored in the clock. Reset Config: Reset the clock configuration to factory default settings. This command could be used to reset the configuration if the Username/password was lost. Factory Reset: Clear all transactions and reset clock configuration to factory default. 724-746-5500 | blackbox.com 5-15 Auto-Sync Time Clock Figure 5-21. Auto-Sync Utility Get Transaction File. . Sort By – Use this function to resort the list of discovered Auto-Sync Time Clocks by; Device Name, MAC Address, IP Address, Status, and Version (firmware). The list will automatically be generated in the order that the clocks are discovered. . Clock Firmware version – Use this function (see Figure 5-22) to show the clock firmware version in the list of discovered Auto-Sync Time Clocks. If left on Hide, the list will be generated without listing the version for the discovered clocks. Figure 5-22. Show Firmware Version. 5-16 724-746-5500 | blackbox.com Chapter 5: Utility Help Menu Functions . About – Use this function to display the About screen (see Figure 5-23). Click on the OK button to close. Figure 5-23. Auto-Sync Utility About Screen. . User Guide – Use this function to open the PDF version of the Auto-Sync Time Clock User Guide from the Auto-Sync Utility CD. 724-746-5500 | blackbox.com 5-17 Auto-Sync Time Clock This page intentionally left blank. 5-18 724-746-5500 | blackbox.com Chapter 6: Maintenance To prevent damage to the Auto-Sync Time Clock, it is recommended to use only paper type media. Special care should be taken to avoid inserting paper with staples, paper clips, or other fastening devices directly under the print frame as damage can occur. Care should also be taken when inserting and removing paper from the clock. Upon inserting, make sure the paper does not bend or crumple, because it may jam the machine. Before attempting to remove the paper you should wait until the unit has completed its print cycle. The clock secures the paper by clamping down on it, so if you attempt to remove the paper too soon it may tear inside the machine. It is recommended to periodically clean the inside of the machine. This is accomplished by using a can of pressurized air to blow out paper dust. A good time to perform this preventative maintenance is when you are changing the print ribbon cartridge. 6. Auto-Sync Time Clock Diagnostics The Web Clock diagnostics can be used to determine the version of the clock firmware, reset the clock configuration and/or transactions, check the LCD display on the clock, reset the print number, display the print settings, display the actual clock configuration, and display the status of the clock. 6.1. How to Display Clock Configuration 1. Click on the Diagnostics link under Clock, and the Clock Diagnostics screen will appear. 2. Click on the button to display the Web clock configuration information (see Figure 6-1). NOTE: This information is read only (non-editable) and displays the clock settings, plus the current status of the clock. Any clock errors such as E4 Prt printing error would appear in red on this screen (see Figure 6-1). Figure 6-1. Show Clock Configuration. 724-746-5500 | blackbox.com 6-1 Auto-Sync Time Clock 6.2. How to Manually Time Sync the Clock Use this function to ensure the clock is able to sync with the desired time server, and/or force a time sync to set the time. 1. Click on the Diagnostics link under Clock, and the Clock Diagnostics screen will appear. Then click on the Time Sync tab and the Time Sync screen will appear (see Figure 6-2). Figure 6-2. Manual Time Sync Clock. 2. Select Yes and press the button to manually Time Sync the clock. The status of the synchronization will be displayed. If everything is performed within the configured deviation you will see “Successful” in the Status field. NOTE: This operation does not change time sync schedules. A manual time sync will be designated in the transactions report as a “USER TIME SYNC”. See the following example, which was obtained by using “View Transactions” in the Reports Utility. 01/06/2010 09:40:13 : - USER TIME SYNC - Successfully sync time to the clock : Auto-Sync (Marketing) 00:40:9D:36:B0:4D(192.168.0.225) with deviation of 954 ms 01/06/2010 09:40:13 : - USER TIME SYNC - Time sent to the clock = 01/06/2010 09:40:13 6-2 724-746-5500 | blackbox.com Chapter 6: Maintenance 6.3. How to Perform LCD Display Clock Diagnostics 1. Click on the Diagnostics link under Clock, and the Clock Diagnostics screen will appear. Then click on the LCD Display tab and the LCD Display screen will appear (see Figure 6-3). Figure 6-3. LCD Display Clock Diagnostics. b...
Dieses Handbuch ist für folgende Modelle:Time Clocks - ASTC3000POE (2.78 mb)
Time Clocks - ASTC3000 (2.78 mb)
Time Clocks - ASTCBK (2.78 mb)
Time Clocks - ASTCKEY (2.78 mb)