|
Anleitung Zusammenfassung
. AC power (Auto-Sync Time Clock comes with 6 foot long cable attached to power adapter if not equipped with the PoE option). . A web browser for configuring the Auto-Sync Time Clock. . It is recommended to install the Utility CD that was included to discover the clock and connect to the web login. . Bonjour (formerly Rendezvous) plug-in installed in Internet Explorer browser for discovering the clock. If not installed you can go to to download and install, or Safari browser for Windows. 3.1. Connecting to the Auto-Sync Time Clock using Zeroconf 1. Start your Web browser and from: Internet Explorer (IE) with Bonjour plug-in: Start IE browser and select from the View menu • Explorer Bar • Bonjour. Double-click on the desired Auto-Sync Time Clock from the list of discovered Bonjour devices on the left-hand side to connect for login (see Figure 3-1). Located clocks Figure 3-1. Using IE with Bonjour to Find Auto-Sync Time Clock. NOTE: Bonjour may have to be downloaded and installed into IE as a plug-in. Safari® with Bonjour: Start Safari browser and select the Bookmarks menu • Show All Bookmarks. Double-click on the desired Auto-Sync Time Clock from the list of discovered Bonjour devices (see Figure 3-2). 724-746-5500 | blackbox.com 3-1 Auto-Sync Time Clock Figure 3-2. Using Safari with Bonjour to Find Auto-Sync Time Clock. Firefox without Bonjour: Use the Auto-Sync Utility which is discussed in detail in Chapter 5 to discover and connect to the clock. If Firefox is your default browser it can be used with the utility to configure the clock. (see next paragraph). Or it is recommended to: Install and start the Auto-Sync Utility on the CD that came with your clock. When the Utility opens it will automatically perform a network search (Discovery) for Auto-Sync Time Clocks. All of the discovered Auto-Sync Time Clocks will be displayed in a list with their Domain, Device Name, IP Address, MAC Address, and Status (see Figure 3-3). Go to View • Clock Firmware version • Show Version to see the clock firmware version. Figure 3-3. Auto-Sync Utility Auto Discovery. 2. Double-click on a clock from the list and your browser will open to the web login screen for that clock. See the following Auto-Sync Time Clock Login example. 3-2 724-746-5500 | blackbox.com Chapter 3: Quick-Start Figure 3-4. Auto-Sync Time Clock Login Screen. NOTE: The Auto-Sync default Clock Name will be auto-sync_ and the clocks MAC address (i.e., auto-sync_00:00:00:00:00:00). In computer networking, a Media Access Control address (MAC address), Ethernet Hardware Address (EHA), hardware address, adapter address or physical address is a quasi-unique identifier assigned to most network adapters or network interface cards (NICs) by the manufacturer for identification. The MAC address usually encodes the manufacturer's registered identification number. 3. If this is your first time logging into the clock enter Username = Admin Password = password If this is not your first time logging into the clock, enter your case-sensitive Username (maximum = 20 characters) and your Password (maximum = 15 characters), then click on the Login button and the Auto-Sync Time Clock Information page will appear (see Figure 3-5). ONLY 1 user can be logged into a clock. NOTE: If you do not perform any activity with the clock via your browser for more than 5 minutes, your web connection will timeout with the clock. You will have to login again. Navigation Menu Link Selections Figure 3-5. Auto-Sync Time Clock Homepage. 724-746-5500 | blackbox.com 3-3 Auto-Sync Time Clock NOTE: If this is not your first time connecting to this Auto-Sync Time Clock and a “Favorites” bookmark was created in your Web browser, select it from the Favorites/Bookmarks menu, and the Auto-Sync Time Clock Login page will be displayed. In this instance you will NOT have to Bonjour the clock as its location has already been discovered and saved! 3.2. First Time Set up of the Auto-Sync Time Clock NOTE: The Auto-Sync Time Clock configuration parameters can be customized at any time and do not have to be done in the following order. It is recommended to set up these parameters to obtain the full potential from you clock. 1. Log into the Auto-Sync Time Clock (see Figure 3-4) and Click on the Settings link under Users, and the Users List screen will appear (see Figure 4-2). Create a new user with a unique Username and Password and store this information in a secure place. Click on the button to save the new username and/or password in the clock’s flash memory. Look – Skip Step 1 if a new User is not desired. 2. Click on the Information link under Clock, and the Clock Information will appear (see Figure 3-5). It is recommended to change the name to suit your nomenclature (default name = auto-sync_MAC). See Figure 3-4 for an example of a default clock name. NOTE: The acceptable characters for clock name are ‘a-z’ upper & lowercase, ‘09’, (-) dash, (_) underscore, and (*) asterisk. Uppercas...
Dieses Handbuch ist für folgende Modelle:Time Clocks - ASTC3000POE (2.78 mb)
Time Clocks - ASTC3000 (2.78 mb)
Time Clocks - ASTCKEY (2.78 mb)
Time Clocks - ASTCPOEK (2.78 mb)