Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4) Keep your phone away from hot, humid conditions or strong sunlight, and don't let it get wet or use this product near water (for example, near a bath tub, kitchen sink, swimming pool). 5) Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. 6) Unplug this product from the wall outlet and refer servicing to our Repair Centre under the following conditions: •

It allows you to make internal calls, transfer external calls from one handset to incoming call instead of paging. "PAGING" on the display. You can stop the paging by pressing / another handset and make conference calls. If the called handset is not in answered with 60 seconds, the called handset will stop ringing and the calling Note: If only one handset is registered to the base station, when is pressed, it will display “NOT POSSIBLE” 4.10.1 Intercom Another Handset 1. In

Press the MENU/OK button, to see "LIST". Press the DOWN button repeatedly until you see "DELETE ALL". Press the MENU/OK button and the display will show “CONFIRM?”. Press the MENU/OK to confirm, or press the PHONEBOOK/CANCEL button to save the contacts. Press the MENU/OK button, to see “PHONE BOOK”. Press the MENU/OK. Press the DOWN button repeatedly until you see “EDIT RECORD”. Press the MENU/OK button and the display will show the first name and number in your phonebook. Scroll UP or DOWN unti

Connect the end with the longer “flat” portion to the phone. Route the handset cable in the channel provided. 6. If not using PoE, plug the power adapter into an AC outlet. Connect the power jack of the power adapter to the power jack in the base of the phone. 6 7. All the lighted buttons on the phone should now briefly light. If not, please verify that the phone has power. 7.1 By default, the 2757 will use Dynamic Host Configuration Protocol (DHCP) to obtain an IP address automatically. You wil

When the power supply cord or plug is damaged or frayed. b. If liquid has been spilled into the product. c. If the product has been exposed to rain or water. d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions because improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. e. If th

..................................13 Placing a Call from the Caller List .....................................................................13 Saving the Name and Number in the Caller List into the Phone Book..............13 Deleting All Records in the Caller list............... ................................................14 Selective Deleting in the Caller List...................................................................14 Phone Book............................................ .....

If pressed during a call, activates the speakerphone. End Key - End a call. If pressed and held, powers off the handset Left/Right Soft Keyimmediately over it in the display. - Performs the function indicated by the text *Key - Press and hold to lock the keypad. Set up a conference call as described on Page 35. 16 Navigation Key Up/CID Key - Scrolls up through list and menu options. Increases the receiver or speakerphone volume during a call. Enters the CID book as described on Page 18. Down/Pho

It is not suitable for connection to a PBX. The ringer equivalence numbers (RENs) of all instruments Do not clean any part of your Celestia connected to an exchange line must not add up to more than 4. 400 with solvent chemicals, abrasives or The Celestia 400 has a REN of 1; most other phones and fax spray cleaners which might get inside the machines have a REN of 1 unless marked otherwise. case and cause damage not covered by the guarantee. When necessary, clean it with a damp cloth. NOTE: if y

• Telephone • Handset • Handset Cord • Line Cord • 3 AA Batteries • Power Adapter • Instruction Manual BATTERY INSTALLATION The 9125 telephone requires 3 AA size 1.5 V batteries for the LCD display. To install the batteries, follow the steps below: 1. Remove the battery cover. The cover is located underneath your phone. 2. Insert 3 AA size 1.5 V batteries. Be careful to observe the polarity markings in the battery compartment. 3. Replace the battery compartment cover. DIALING MODE The 9125 dial

(Adjust only those controls covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation.) • If the telephone has been dropped or the housing damaged. • If the telephone exhibits distinct change in performance. SAVE THESE INSTRUCTIONS 5 TELEPHONE PART IDENTIFICATION S peak er 9 Dial K ey s M ic S tatus LE D 10 V olum e Down B utton M em ory Dial K ey 11