8. Lift the base’s antenna to a vertical position. 9. Set the TONE/PULSE switch located on the back of the base to correct dialing mode. Please check with your local Phone Company if uncertain of the type of service. 10.Place handset in the cradle to begin initial charging. Remember, you must charge the phone for at least 12 hours before you use the phone for the first time. PM050905_W425_RevA.qxd 5/9/05 4:15 PM Page 13 Getting Started HANDSET BATTERY CHARGING The battery in the handset must be

-OR- Press

- place it away from electronic appliances such as televisions, microwave ovens, radios, personal computers, wireless devices or other cordless phones. - avoid facing radio frequency transmitters, such as external antennas of mobile phone cell stations. - avoid plugging it into the same circuit as other major household electrical appliances because of the potential for interference. Try moving the appliance or the base unit to another power outlet. If the reception for a base unit location is no

The three parties can share the conversation and no network subscription is required. During an external call, press or on the handset to establish the conference call if another handset has answered the call. NOTE: Any handset that hangs up during a call will leave the rest of the handsets still in connection with the external caller. USING YOUR PHONE USING YOUR PHONE Your phone can store up to 100 directory entries with names and numbers. Each directory entry can have a

16. Do not attempt to open the AC adapter. There are potentially dangerous voltages inside, and there are no serviceable parts. 17. Discontinue use of product and contact Clarity if the product overheats, has a damaged cord or plug, if the product has been dropped or damaged or if the product has come into contact with liquids. 18. Use only the AC adapter provided with this product or a replacement AC adapter provided by Clarity. 19. This phone amplifies sound to loud volumes. To prevent hearing

See Figure 1. 2. Slide open the battery compartment door and connect the rechargeable battery into the battery compartment. See Figure 2. 3. Put the handset on the base to charge for at least 24 hours before first use. Subsequent charging time should be 6-8 hours a day. INSTALLING YOUR D613HS USER GUIDE © 2009 Clarity, a division of Plantronics, Inc. All rights reserved. Amplifying your life, Clarity, the amplification device, Clarity and the amplification device combined, Clarity, D613HS, D603,

Press and hold to delete all characters/digits. (During a call): Press this button to mute a call; press again to unmute call. (Calls List/Phonebook entry): Press this button to delete the entry. (Answering Machine mode): Press this button or the “0” key to delete the current message playback. phoneBooK button: Press this button to access the phonebook. (Editing Mode): press to move the cursor to the left. note: The phonebook will hold up to 30 name and numbers. (End)/BacK button: Press to end a

The phone will then go back to idle. De-register all handsets 1. Unplug the power from the base. 2. Press and hold the FIND button on the base for 10 seconds. 3. Plug back in the power of the base. 4. Release once the IN USE light starts to fl ash rapidly. 5. Within 2 seconds, press and release the FIND button on the base again. This will de-register all handsets. The IN USE light on the base will be OFF and NOT REGISTERED will display on each handset menu screen. call liSt (ciD) menu optionS Se