Login:
Stimmen - 2, Durchschnittliche Bewertung: 4.5 ( )

Anleitung AT&T, modell TL32350

Hersteller: AT&T
Dateigröße: 1.87 mb
Dateiname:
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


Lift out the old battery and disconnect it from the handset. Follow the instructions above to install and charge the new battery. IMPORTANT INFORMATION: Use only the supplied rechargeable battery or replacement battery (model BT166342). To order, visit our website at or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Battery installation and charging Battery charging Once you have installed the battery, the screen indicates the battery status (see the table below). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the telephone base or charger when not in use. The battery is fully charged after 16 hours of continuous charging. If the screen is blank, you need to charge the handset without interruption for at least 30 minutes to give the handset enough charge to use the telephone for a short time. The screen shows Low battery until you have charged the battery without interruption for at least 30 minutes. The following table summarizes the battery charge indicators and actions to take. Battery indicators Battery status Action The screen is blank or shows Place in charger. Battery has no or very little charge. The handset cannot be used. Charge without interruption until the screen shows Low battery or HANDSET X (at least 30 minutes). The screen shows Low battery and flashes. Battery has enough charge to be used for a short time. Charge without interruption until the screen shows HANDSET X (at least 30 minutes). The screen shows HANDSET X and the battery icon shows , or . Battery is charged. To keep the battery charged, place it in the telephone base or charger when not in use. NOTES: If you are on a call in low battery mode, you hear four short beeps every 50 seconds. When you place the handset in the telephone base or charger, if no battery is installed in that handset, the CHARGE light is off and the screen shows NO BATTERY. Follow the instructions in Battery installation on page 3 to install the battery. HANDSET 1 11/20 10:30PM Battery status icon Quick reference guide REDIAL/PAUSE Press repeatedly to view the last 20 numbers dialed. While entering numbers, press and hold to insert a dialing pause. PHONE/FLASH Press to make or answer a call. During a call, press to answer an incoming call when you receive a call waiting alert. 1 While reviewing a caller ID history entry, press repeatedly to add or remove 1 in front of the telephone number before dialing or saving it in the directory. 0 While entering names in the directory, press to add a space. MUTE/REMOVE During a call, press to mute the microphone. While predialing, press to delete digits. While reviewing the redial list, directory, speed dial list or caller ID history, press to delete an individual entry. TONE During a call, press to send touch-tone signals temporarily. /SPEAKER Press to turn on the handset speakerphone. Press again to resume normal handset use. DIR/VOLUME Press ...

Dieses Handbuch ist für folgende Modelle:
Schnurlostelefone - TL32100 (1.87 mb)
Schnurlostelefone - TL32200 (1.87 mb)
Schnurlostelefone - TL32100 (1.87 mb)
Schnurlostelefone - TL32250 (1.87 mb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien