Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: LG Dateigröße: 1.9 mb Dateiname: Unterrichtssprache:

Dieses Gerät hat auch andere Anweisungen:

Projektoren - BX401C (1.92 mb)

Projektoren - BX401C (1.95 mb)

Tint (Command:kj) Ack . To adjust the screen tint.(Video/Component 60Hz or [u] [ ] [Set ID] [ ] [OK] [Data] [x] NTSC signal) Data 0 : Normal 1 : Cool 2:Warm 3 : Natural Transmission [k] [ j ] [ ] [Set ID] [ ] [Data] [Cr] Data Red : 0 ~ Green : 64 * Refer to ‘Real data mapping2’. Ack [ j ] [ ] [Set ID] [ ] [OK] [Data] [x] Data Red : 0 ~ Green : 64 RS-232C External control device setup 12. Red ADC gain Adjustment (Color R) (Command:jw) . Adjust the Red gain of ADC part.(RGB) Transmission [ j ] [w] [ ] [Set ID] [ ] [Data] [Cr] Data Min : 0 ~ Max : 64 * Refer to ‘Real data mapping 1’. Ack [w] [ ] [Set ID] [ ] [OK] [Data] [x] Data Min : 0 ~ Max : 64 13. Green ADC gain Adjustment (Color G) (Command:jy) . Adjust the Green gain of ADC part.(RGB) Transmission [ j ] [y] [ ] [Set ID] [ ] [Data] [Cr] Data Min : 0 ~ Max : 64 * Refer to ‘Real data mapping 1’. Ack [y] [ ] [Set ID] [ ] [OK] [Data] [x] Data Min : 0 ~ Max : 64 14. Blue ADC gain Adjustment (Color B) (Command:jz) . Adjust the Blue gain of ADC part.(RGB) Transmission [ j ] [z] [ ] [Set ID] [ ] [Data] [Cr] Data Min : 0 ~ Max : 64 * Refer to ‘Real data mapping 1’. Ack [z] [ ] [Set ID] [ ] [OK] [Data] [x] Data Min : 0 ~ Max : 64 15. Low Power (Command:jq) . To reduce the power consumption of the projector. Transmission [ j ] [q] [ ] [Set ID] [ ] [Data] [Cr] Data 0 : Low Power Off 1 : Low Power On Ack [q] [ ] [Set ID] [ ] [OK] [Data] [x] Data 0 : Low Power Off 1 : Low Power On 16. Auto Configure (Command:ju) . To adjust picture position and minimize image shaking automatically. It works only in RGB mode. Transmission [ j ] [u] [ ] [Set ID] [ ] [Data] [Cr] Data 1 : To set Ack [u] [ ] [Set ID] [ ] [OK] [Data] [x] Data 1 : To set 17. Input Select (Command:xb) . To select input source for the Set. Transmission [x] [b] [ ] [Set ID] [ ] [Data] [Cr] Data 20 : Video 60 : RGB1 61 : RGB2 80 : HDMI Ack [b] [ ] [Set ID] [ ] [OK] [Data] [x] Data 20 : Video 60 : RGB1 61 : RGB2 80 : HDMI 18. Key (Command:mc) . To send Key code of IR romote control. Transmission [m] [c] [ ] [Set ID] [ ] [Data] [Cr] Data Key code Ack [b] [ ] [Set ID] [ ] [OK] [Data] [x] Key code Button Key code Button Key code 40 BLANK 84 41 TIMER 26 02 W.PEAK 69 03 KEYSTONE A4 POWER AD GAMMA 6E SOURCE EF MODE 4D MENU 43 4F EXIT 5B 4E OK 44 ZOOM 5C STILL BC LAMP MODE 68 RATIO 79 SLEEP 0E AUTO 92 Information Supported Monitor Display * The following table lists the display formats supported by the projector. Sources Format Vertical Freq.(Hz) Horizontal Freq.(kHz) * If the projector does not support the input signal, “Out of Range” message appears on the screen. * The projector supports DDC1/2B type as Plug & Play function. (Auto recognition of PC monitor) * The Synchronization input form for horizontal and vertical frequencies are Separate. * According to PC, the optimum vertical frequency may not be displayed up to the optimum frequency of set in ‘Registration information (Display registration information)’. (ex, The optimum vertical frequency may be displayed up to 85Hz or under in the resolution of 640X480 or 800X600.) Signal Component-*1 HDMI(DTV)-*2 59.94 / 60Hz 480i O X 480p O O 720p O O 1080i O O 50Hz 576i O X 576p O O 720p O O 1080i O O 24/25/30Hz 1080p O O * Cable type 1- RCA to D-Sub Adapter 2- HDMI to HDMI Cable Maintenance * The projector needs little maintenance. You should keep the lens clean because any dirt or stains may appear on the screen. If any parts need to be replaced, contact your dealer. When cleaning any part of the projector, always turn the power off and unplug the projector first. Cleaning the lens Clean the lens whenever you notice dirt or dust on the surface of it. Wipe the lens surface gently with an air spray or a soft, dry lint-free cloth. To remove dirt or stains on the lens, moisten a soft cloth with water and a neutral detergent and wipe the lens surface gently. Cleaning the Projector Case To clean the projector case, first unplug the power cable. To remove dirt or dust, wipe the casing with a soft, dry, lint-free cloth. To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral detergent and then wipe the casing. Do not use alcohol, benzene, thinners or other chemical detergents as these can cause the casing to be warped or discolored. Information Replacing the Lamp Lamp Replacement The change interval of lamp may depend on the use environment of Projector. You can see the used lamp time in the CHECKING LAMP TIME section of the Menu (page.29). You must replace the lamp when: Lamp indicators The projected image gets darker or starts to deteriorate. The lamp indicator is red. . The message “Replace the lamp” appears on the screen when turning the projector on. Be careful when replacing lamp -Press the POWER button on the control panel or remote control to turn off power. -If the operation indicator LED is orange and blinking, do not disconnect the main supply until the operation indicator LED is lit up constant...

Herunterladen

Geben Sie zwei Ziffern: