Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Toshiba Dateigröße: 1.2 mb Dateiname: Unterrichtssprache:

This also allows you to use external speakers. To control the audio, turn on the TV and the stereo amplifier. Audio Amplifier TV To cable, cable box or antenna IN OUT AUDIO L R VIDEO Y PB P AUDIO L/MONO R VIDEO IN OUT ANT (75.) VIDEO 1 VIDEO 2 AUDIO S-VIDEO L/MONO R 10 You will need: • two coaxial cables • two sets of standard A/V cables Note: Do not connect the same VCR to the output and input jacks on the TV at the same time. For better picture quality, if your VCR has S- video, you can use an S-video cable instead of the standard video cable. Do not connect a standard video cable and an S-video cable to VIDEO1 simultaneously. You will need: • one set of standard A/V cables Note: For better picture quality, if your camcorder has S-video, you can connect an S-video (and standard audio cables) to VIDEO1 on the back of the TV. Do not connect a standard video cable and an S-video cable to VIDEO1 simultaneously. You will need: • one coaxial cable • one pair of audio cables The unauthorized recording, use, distribution or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. J3S20221A(E)_P07-16 10 11/02/2005, 3:06 PM Using the remote control Preparing the remote control for use With the remote control, you can operate your TV, most VCR and DVD player models, and cable TV converters together, even if they are different brands. If you will be using your TV with a Toshiba VCR or DVD player, your remote control is already programmed and ready to use. If you own different brands of VCRs, DVD players and/or converters, you first have to program your remote control. (See “Programming the remote control to operate your other devices” on page 12.) Installing the remote control batteries To install the batteries: 1. Open the battery cover on the back of the remote control. 2. Install two “AAA” size batteries. Match the + and – signs on the batteries to the signs on the battery compartment. 3. Close the battery cover on the remote control until the lock snaps. Note: The TV remote control may not operate your VCR, DVD player, or cable TV converter. Refer to the owner's manual supplied with the applicable equipment to see which features may be available. Additionally, the remote control for this TV may not support certain features available on the original remote controls for such additional equipment, in which case, it is suggested that you use the original remote control for the applicable device. Caution: • Never throw batteries into a fire. Notes: • Be sure to use AAA size batteries. • Dispose of batteries in a designated disposal area. • Attention should be drawn to the environmental aspects of battery disposal. • Do not mix different battery types or combine used batteries with new ones. • If the remote control does not operate correctly, or if the operating range becomes reduced, replace both batteries with new ones. • If the batteries are dead or if you will not be using the remote control for a long time, remove the batteries to prevent battery acid from leaking into the battery compartment. Using the remote control to operate your other devices To control a VCR: Program the remote control to recognize the brand of your VCR (see “Programming the remote control to operate your other devices” on page 12). The buttons shown at VCR Power Channel Numbers right will then control Channel +/– the VCR. Press the VCR button first. CH Enter Fast Forward Play Rewind TV/VCR Record Stop VCR CH / Pause/Still POWER 1 2 3 4 5 6 7 8 9 0 TV VCR CABLE DVD 100 CH + CH – FAVEXIT RECALL TV/VIDEO CH RTN CODE MTS SLEEP MUTE REW FFPLAY TV/VCR PAUSE/STILL REC VCR CH DVD SKIP STOP RESET CAP/TEXT DVD CLEAR DVD MENUTOP MENU 1/2 MENU/ ENTER VOL FAV VOL +– +10 VOL DISPLAY To control a DVD player: Program the remote Power control to recognize the brand of your DVD DVD player (see Number “Programming the buttons remote control to DVD MENU operate your other // / Enter devices” on page 12). The buttons shown at right will then control the TOP Menu DVD player. Press the Volume / (TV) DVD button first. DVD Clear Display Fast Forward Play Rewind DVD Menu Stop DVD Skip / Pause/Still 11 POWER 1 2 3 4 5 6 7 8 9 0 TV VCR CABLE DVD 100 CH + CH – FAVEXIT RECALL TV/VIDEO CH RTN CODE MTS SLEEP MUTE REW FFPLAY TV/VCR PAUSE/STILL REC VCR CH DVD SKIP STOP RESET CAP/TEXT DVD CLEAR DVD MENU TOP MENU 1/2 MENU/ ENTER VOL FAV VOL +– +10 VOL DISPLAY AppendixUsing the TV’s Features Setting upyour TV Connectingyour TV Welcome to Toshiba ImportantSafeguards Using theRemote Control J3S20221A(E)_P07-16 11 11/02/2005, 3:06 PM To control a cable TV converter: Program the remote control to recognize the brand of your converter (see “Programming the remote control to operate your other devices” below). The buttons shown at right will control the cable TV converter. Press the CABLE button first. CABLE Power Channel Numbers Channel...

Herunterladen

Geben Sie zwei Ziffern: