Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Barco Dateigröße: 8.4 mb Dateiname: Unterrichtssprache:

A changed file cannot be restored! A.3 Restoring a set of key data CAUTION: If a backup file has been manually changed, it will no longer be possible to restore it in the projector! Different levels of restore Different situations lead to different levels of restore: • restore data to a used PMP which already holds data and settings • restore data to a new PMP which has no data and settings yet When restoring to a new PMP, the Projector Support tool automatically manages the full restore. This means that the operator can not interact. The serial number and history are restored as well. When restoring to a used PMP, a selection of the files to be restored can be made. The Projector Support tool however manages the files which are critical: • serial number, runtimes, etc. will not be overwritten • option keys will not be blanked or overwritten • some files will be merged: newly added data (e.g. custom geometry files) will not be lost • some settings (e.g. automatic shutdown, warning messages ON/OFF) will not be overwritten • etc. How to restore the key data in a used PMP? It is assumed that communication with the projector has been established through Projector Support and that an original backup file is available (zip format). 1. In the Restore section of the Projector Support tool user interface, hit Browse Image A-14 Projector Support tool: browse to the folder with the backup file 2. Browse to the folder on the computer where the backup file is stored 3. Select the backup file and hit Open R59770498 PMP KIT 28/02/2011 A.Backupandrestoredata Image A-15 Projector Support tool: browse to the backup folder 4. In the Restore section, you can select an option (not required): -Overwrite serial number -Overwrite device type Image A-16 5. In the Restore section, hit All settings Image A-17 Projector Support tool: start the restore of the backup 6. An overview of the files to be restored will be shown: check or uncheck the boxes according to what is needed and confirm with OK R59770498 PMP KIT 28/02/2011 A.Backupandrestoredata Image A-18 Projector Support tool: confirm the restore of the backup 7. Wait for the restore process to be finished Image A-19 Projector Support tool: progress bar Image A-20 Projector Support tool: reboot of the PMP after the restore A successful restore of the backup file is indicated by a green oval. R59770498 PMP KIT 28/02/2011 A.Backupandrestoredata Image A-21 Projector Support tool: restore of the backup was successful An error during the restore of the backup file is indicated by a brief description and a red oval. Solve the cause of the error and retry. R59770498 PMP KIT 28/02/2011 A.Backupandrestoredata Image A-22 Projector Support Tool: restore of the backup was not successful HowtorestorethekeydatainanewPMP? It is assumed that an original backup file is available (zip format). 1. Start the Projector Support tool and select Queryin the Communication Parameters section of the user interface 2. Select the device which has no serial number and hit OK R59770498 PMP KIT 28/02/2011 A.Backupandrestoredata Image A-23 Projector Support tool: query list Tip: If more then one PMP without serial number is listed, the MAC address must be checked. On the PMP board a label mentioning the MAC address can be found near the power connector on the same side as the heatsinks. 3. In the Restore section of the Projector Support tool user interface, hit Browse R59770498 PMP KIT 28/02/2011 A.Backupandrestoredata Image A-24 Projector Support tool: hit browse in the restore section 4. Browse to the folder on the computer where the backup file is stored 5. Select the backup file and hit Open 6. In the Restore section, hit All settings Image A-25 Projector Support tool: browse to the backup folder 7. An overview of the files that will be restored is shown for a few seconds, but it cannot be changed R59770498 PMP KIT 28/02/2011 A.Backupandrestoredata Image A-26 Projector Support tool: overview of the files that will be restored 8. Wait for the restore process to be finished Image A-27 Projector Support tool: progress bar Image A-28 Projector Support tool: reboot of the PMP after the restore R59770498 PMP KIT 28/02/2011 A.Backupandrestoredata A successfulrestoreofthebackup fileisindicatedbyagreenoval,andtheoriginalserialnumberwillbe displayedinthe Projector identification section of the user interface. Image A-29 An error during the restore of the backup file is indicated by a brief description and a red oval. Solve the cause of the problem and retry. R59770498 PMP KIT 28/02/2011 A.Backupandrestoredata R59770498 PMP KIT 28/02/2011 Index INDEX B backup 7, 15, 18 making of 18 PMP 7 D description 5 kit 5 I input module 7, 12 installing 12 removing 7 installation 5, 7 kit 5,7 installing 10, 12 input module 12 PMP 10 introduction 5 K kit 5,7 description 5 installation 5 installation (detailed) 7 P PMP 7–8, 10 backup 7 installing 10 replacing 7 PMP kit 5 Projector Support 15 connecting 15 R removing 7–8 input module 7...

Herunterladen

Geben Sie zwei Ziffern: