Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
b Press MENU. The menu appears. 0 Select [Rotate] with b/B, then press •. □ Select ■(" "V with A , and rotate the image with b/B. e Select [OK] with A/T, then press •. To cancel the rotation In Step □ or 5 , select [Cancel]. • Protected images, movies (MPEG movie), or images recorded in Clip Motion/Multi Burst modes cannot be rotated. • You may not be able to rotate images shot with other cameras. • Also, when viewing images on a computer, the image rotation information may not be reflected depending on the application software. 64 Playing back images shot in Multi Burst mode Mode selector: [► You can play back Multi Burst images continuously or play them back frame by frame. This function is used for checking the images. Control button Playing back continuously a Set the mode selector to H. b Select the Multi Burst image with b/B. The selected Multi Burst image is played back continuously. To pause Press To resume playback, press z again. The playback starts from the frame displayed on the LCD screen. • When the images are played back on a computer, the 16 frames you shot will all be displayed at the same time as part of one image. • When Multi Burst images are played back on a camera without the Multi Burst feature, the 16 frames will all be displayed at the same time, as part of one image, just as they are on a computer. Playing back frame by frame - Jog playback a Set the mode selector to IB. b Select the Multi Burst image with b/B. The selected Multi Burst image is played back continuously. 0 Press • when the desired frame is displayed. “Step” appears. □ Advance the frame with b/B. ►:The next frame is displayed. When you press and hold B, the frame advances. b:The previous frame is displayed. When you press and hold b, the frame advances in the reverse direction. To return to normal playback In Step □ , press The playback starts from the frame displayed on the LCD screen. 65 Advanced still image viewing To delete shot images When using this mode, you cannot delete only certain frames. When you delete images, all 16 of the frames are deleted at the same time. 1 Display the Multi Burst image you want to delete. 2 Press “ii/DD (Delete). 3 Select [Delete], then press •. All of the frames are deleted. 66 Protecting images - Protect Mode selector: [► To prevent accidental erasure of an important image, you can protect it. Control button On the single screen a Set the mode selector to H. b Display the image you want to protect with b/B. 0 Press MENU. The menu appears. d Select [Protect] with b/B, then press •. The image currently being displayed is now protected, and the <— (Protect) mark is indicated on the screen. e To protect other images, display the image you want to protect with b/B, then press •. To cancel the protection In Step □ or 5 , press • again. The mark disappears. On the Index (nine-image) screen a Set the mode selector to IB, press the zoom W (index) button once to switch to the Index (nine-image) screen. b Press MENU. The menu appears. 0 Select [Protect] with b/B, then press •. d Select [Select] with b/B, then press •. e Select the image you want to protect with A/V/b/B, then press •. The green (Protect) mark is indicated on the selected image. f To protect other images, repeat Step 5. g Press MENU. 67 Still image editing □ Select [OK] with B, then press •. The mark turns white and the selected image is protected. To cancel the protection In Step □, select [Cancel], or in Step 8, select [Exit]. To release protection In Step 5, select an image for which you want to release protection with A/T/b/B, and press •. The <— mark turns gray and repeat this operation for all the images for which you want to release protection. Then, press MENU, select [OK], and press •. To protect all the images in folder In Step □ , select [All In Folder], then press Next, select [On], then press •. To release protection of all the images in the folder In Step □ , select [All In Folder], and press Then select [Off], and press •. On the Index (triple-image) screen a Set the mode selector to IB, press the zoom W (index) button twice to switch to the Index (triple-image) screen. b Move the image you want to protect to the center with b/B. 0 Press MENU. The menu appears. d Select [Protect] with A/T, then press •. The center image is protected, and the (Protect) mark is indicated on that image. e To protect other images, move the image you want to protect to the center with b/B, and repeat Step □. To release protection In Step □, select the image from which you want to release protection, and press •. To release protection from all of your images, repeat this process for each of them. 68 Changing image size d Select [Resize] with b/B, then press •. - Resize Mode selector: [► You can change the image size of a recorded image, and save it as a new file. You can resize to the following sizes. 3.1M, 2.0M, 1.2M, and VGA. The original i...
Dieses Handbuch ist für folgende Modelle:Kameras - DSC-P32 (2.49 mb)