Stimmen - 3, Durchschnittliche Bewertung: 3 ( )

Hersteller: Panasonic Dateigröße: 8.21 mb Dateiname: PTDZ8700U.PDF Unterrichtssprache:

• Sub-menu items vary according to the selected input signal. *1 : Some default settings vary by the selected input signal. *2 : PT-DZ8700U/PT-DS8500U only *3 : PT-DW8300U only *4 : PT-DZ8700U only Settings ENGLISH -51 PICTURE menu PICTURE menu Note See “Navigating through the menu”z(.page 49). See “MAIN MENU” and “SUB MENU”z(.page 50). PICTURE MODE The user can switch to the desired picture mode suitable for the image source and the environment in which this projector is used. 1) Press ^Ў to select [PICTURE MODE]. 2) Press <> to switch [PICTURE MODE]. • The setting will change as follows each time <> is pressed. STANDARD CINEMA NATURAL USER DICOM SIM. • Factory defaults are [GRAPHIC] for RGB system and [STANDARD] for moving images. • DICOM is an abbreviation for “Digital Imaging and Communication in Medicine”, which is a standard for medical imaging devices. Although the name “DICOM” is used, this projector is not a medical device. Accordingly, do not use the projected images for medical diagnosis or similar usage. • When button is pressed while a [PICTURE MODE] other than [USER] is selected, the setting is saved and will be used as the preset value next time a signal is inputted. At this time, all the data except [SYSTEM SELECTOR] in the [PICTURE] menu are saved. • The factory default of [USER] is the image conformed to ITU-R BT.709 Standard. JChanging the name of [USER] 1. Select [USER] in step 2). 2. Press button. • A screen showing details of the [PICTURE MODE] will be displayed. 3. Press ^Ў to select [PICTURE MODENAME CHANGE]. 4. Press button. • The [PICTURE MODE NAME CHANGE] screen will be displayed. GRAPHIC DYNAMIC STANDARD The picture becomes suitable for moving images in general. CINEMA The picture becomes suitable for movie sources. NATURAL The picture complies with sRGB. DICOM SIM. The picture becomes similar to DICOM Part14 gray scale. DYNAMIC The light output is maximized for use in bright areas. GRAPHIC The picture becomes suitable for input from to the personal computer. USER You can set your favorite picture mode. PICTURE MODE NAME CHANGE 5) Press ^Ў<> to select characters and press button to inputthem. 6.Press ^Ў<> to select [OK], andpress button. zThe picture mode name is changed. Settings 52 - ENGLISH PICTURE menu CONTRAST COLOR PICTURE menu CONTRAST COLOR You can adjust the contrast of the projected image. You can adjust the color saturation of the projected image. 1) Press ^Ў to select [CONTRAST]. 1) Press ^Ў to select [COLOR]. 2) Press <> or button. • The [CONTRAST] individual adjustment screen 2) Press <> or button. will be displayed. • The [COLOR] individual adjustment screen will be displayed. 3) Press <> to adjust the level. 3) Press <> to adjust the level. Operation Adjustment Adjustment range Press >. Raises the picture brightness and the picture becomes clearer. Maximum value 31 Press <. Lowers the picture brightness and weakens the picture. Minimum value -31 Operation Adjustment Adjustment range Press >. Deepens colors. Maximum value 31 Press <. Weakens colors. Minimum value -31 TINT Attention • Adjust the BRIGHTNESS in advance if necessary. BRIGHTNESS You can adjust the brightness of the projected image. 1) Press ^Ў to select [BRIGHTNESS]. 2) Press <> or button. • The [BRIGHTNESS] individual adjustment screen will be displayed. 3) Press <> to adjust the level. You can adjust the skin tone in the projected image. 1) Press ^Ў to select [TINT]. 2) Press <> or button. • The [TINT] individual adjustment screen will be displayed. 3) Press <> to adjust the level. Operation Adjustment Adjustment range Press >. Increases the brightness of the dark (black) parts of the screen. Maximum value 31 Press <. Reduces the brightness of the dark (black) parts of the screen. Minimum value -31 Operation Adjustment Adjustment range Press >. Adjusts skin tone toward greenish color. Maximum value 31 Press <. Adjusts skin tone toward reddish- purple. Minimum value -31 Settings ENGLISH -53 PICTURE menu PICTURE menu Settings COLOR TEMPERATURE You can adjust the white balance of the projected image. 1) Press ^Ў to select [COLORTEMPERATURE]. 2) Press <> or button. • The [COLOR TEMPERATURE] individual adjustment screen will be displayed. 3) Press <> to switch [COLORTEMPERATURE]. • The setting will change as follows each time <> is pressed. DEFAULT • USER1 USER2 (in units of 100K) 9300K 3200K U: [DEFAULT] cannot be selected when the [PICTRUE MODE] has been set to [USER] or [DICOM SIM.]. Note • When any setting other than [OFF] has been selected for [COLOR MATCHING] (.page 68), the [COLOR TEMPERATURE] setting is fixed to [USER1]. • The value of color temperature is for reference only. JTo further adjust toward the desired white balance 4) Select [USER1] or [USER2] in Step 3). 5) Press button. • The [COLOR TEMPERATURE] screen will be displayed. 6) Press ^Ў to select [WHITEBALANCE]. 7) Press button. • The [WHITE BA...

Herunterladen

Geben Sie zwei Ziffern: