Stimmen - 1, Durchschnittliche Bewertung: 5 ( )

Hersteller: Allegro Industries Dateigröße: 199.58 kb Dateiname: Unterrichtssprache:

• Make sure only NIOSH approved airline hoses are used • Adjust pressure relief valve, to adjust for any change in number of users, or lengths of airline hose. o Check condition of filter elements. o Replace if necessary. 4) If there is a drop in outlet pressure: • Check if exhaust filter housing and canister is cross-threaded or not seated firmly onto housing gasket. o Remove canister, inspect threads and gasket and reinstall. • Check for dirty inlet filter element. o Replace if necessary. • Check if vanes are sticking or worn out. o Flush pump with approved solvent. o If unsuccessful, follow instructions under Disassembly, to check vane condition. o Replace if necessary. • Check adjustment of pressure relief valve. o Adjust if necessary. AIR DRIVEN PUMP: 1. If low torque or speed, or motor runs hot: • Check for dirt foreign material, rust, or a jammed machine. • Check for misalignment or poor lubrication. • Check for insufficient air pressure. o Inspect interior of motor, remove contaminants or foreign objects. o Realign motor, add lubricant to inline lubricator. o Check source of air (compressor) for proper pressure and CFM settings and/or capability. o Supply airline to the motor could be too small (1/2”I.D. minimum). • Ensure the exhaust is not restricted. o Clean of debris or ice formed on muffler. o If ice has formed on muffler, check for excess moisture in air supply. o Make sure you use muffler extension. • If runs well, then slows down. o Check for proper alignment, and realign. o Make sure the exhaust port or muffler is not restricted. o Make sure machine is not jammed 2. If motor won’t turn at all: • Check for dirt, foreign material, rust, or a jammed machine. • Check for misalignment or poor lubrication. • Contact Allegro Technical Support Department. WARNING! Shut down pump and unplug before working on unit. WARRANTY Damage resulting from carrier handling abuse is not covered by product warranty. To protect your interest, inspect product immediately. The following warranty information is made in lieu of all other warranties expressed, implied or statutory, including but not limited to, the implied warranties of merchantability and fitness for purpose. It is in lieu of any implied warranty of merchantability, fitness for a particular purpose or other warranty of quality, except of title and against patent infringement. In the event any ALLEGRO INDUSTRIES’ product is found to be defective in material, workmanship, or not in conformance with any expressed warranty for a specific purpose, ALLEGRO’S only obligation and your exclusive remedy shall be to repair, replace, or refund the purchase price of such parts or products upon timely notification thereof and not to exceed 1 year from date of purchase and substantiation that the product has been stored, maintained and used in accordance with ALLEGRO INDUSTRIES’ written instructions. (Disposable hoods excluded.) Maximum liability is in no case to exceed the value of the ALLEGRO INDUSTRIES’ unit involved. LIMITATION OF LIABILITY Except as provided above, ALLEGRO INDUSTRIES shall not be liable or responsible for any loss or damage, whether direct, indirect, incidental, special or consequential, arising out of sale, use, or misuse of ALLEGRO INDUSTRIES’ products, or the user’s inability to use such products. Refer to this Users Manual for proper use. Transportation charges in all cases will be at customer expense. THE REMEDIES SET FORTH HEREIN ARE EXCLUSIVE. FOR MORE INFORMATION AND ASSISTANCE ON ALLEGRO INDUSTRIES PRODUCTS OR PARTS CATALOG, CONTACT ALLEGRO TECHNICAL SERVICES TOLL FREE AT 1-800-622-3530, OR E-MAIL techsvc@allegrosafety.com. RETURN POLICY NOTE: THE FOLLOWING REQUIREMENTS MUST BE FOLLOWED IN RETURNING GOODS OR PRODUCTS TO ALLEGRO INDUSTRIES. 1. ALLEGRO INDUSTRIES requires that you obtain a Return Merchandise Authorization Number (RMA#) prior to returning merchandise to us. This number can be obtained by calling ALLEGRO INDUSTRIES Customer Service at 800-622-3530, or requesting it in writing. NOTE: Products returned to ALLEGRO INDUSTRIES without a Return Merchandise Authorization number will not be accepted and/or processed until one is acquired. 2. Before returning the product, decontaminate and clean it to remove any hazardous materials that may have settled on the product during use. Products suspected of asbestos and/or other dangerous contamination will be refused and returned freight collect. 3. The products or components must be returned to ALLEGRO INDUSTRIES freight prepaid, with the RMA number marked...

Herunterladen

Geben Sie zwei Ziffern: