Stimmen - 5, Durchschnittliche Bewertung: 4 ( )

Hersteller: Allegro Industries Dateigröße: 199.58 kb Dateiname: dc648a5d-18bf-4fd5-9683-262d20332d6b.pdf Unterrichtssprache:

If any damage is found, report and submit claim to carrier. ALLEGRO® INDUSTRIES TABLE OF CONTENTS PAGE NUMBER INTRODUCTION/DESCRIPTION .....................................................................................................................1 WARNINGS AND LIMITATIONS......................................................................................................................1 SAFETY PRECAUTIONS ...................................................................................................................................2 USERS INSTRUCTIONS .....................................................................................................................................3 Pressure Relief Valve Inlet Extension Kit TOLERANCES AND WARNINGS ....................................................................................................................5 Air Pump Explosion Proof Pump SPECIFICATIONS ..............................................................................................................................................6 INSPECTION .......................................................................................................................................................7 All Pumps Electrical Motors Air Driven Motors MAINTENANCE ...................................................................................................................................................8 Filters Flushing Lubrication Vane Replacement PARTS & ACCESSORIES ..................................................................................................................................10 TROUBLESHOOTING .......................................................................................................................................11 Electric Models Air Driven Pump WARRANTY .........................................................................................................................................................IBC RETURN POLICY ................................................................................................................................................IBC INTRODUCTION This manual provides instructions for the use and maintenance of Allegro Ambient Air Breathing Apparatus (AABA) Pumps. You must read and understand this manual and be trained in the proper use of the equipment before using it in a contaminated atmosphere. There are many federal, state, and local codes and regulations governing sales, construction, installation, and/or use of products for certain purposes, which may vary. Allegro cannot be held responsible for how the products are used and installed. Before purchase and use, the buyer must review the product application, and be sure that the product installation and use will comply with those regulations. For more information and assistance on Allegro Products, contact Allegro Technical Support Department at 800-622-3530 or e-mail techsvc@allegrosafety.com. DESCRIPTION Allegro AABA pumps are designed to pump clean, breathable air from an ambient source to NIOSH approved Type C, Continuous Flow Supplied Air Respirators. WARNINGS AND LIMITATIONS CAUTION NIOSH approved respirators and corresponding hose lengths must function at pressures generated by air pumps. Use only Type "C" (constant flow, low pressure) respirators with AABA pumps. WARNING! Exhaust filter DOES NOT remove dangerous organic vapors, gases, or particulate. DO NOT use this equipment if dangerous organic vapors, gases, or particulates are present. WARNING! Ambient air breathing pumps should only be used in areas containing sufficient oxygen to support life. Do not use where contaminants are Immediately Dangerous to Life and Health (IDLH). S A F E T Y P R E C A U T I O N S FOLLOW ALL WARNINGS AND CAUTIONS ALL PUMPS: DO NOT place oil-less air pump in an area that cannot GUARANTEE clean Grade D breathable air, per OSHA 29 CFR 1910.134 to the AABA inlet. See below for Grade D requirements. DO NOT attempt to service the air pump while it is running or while it is connected to electrical or air power. DO NOT oil or lubricate the pump. DO NOT kink power cord and never allow the cord to come in contact with oil, grease, hot surfaces, or chemicals. DO NOT use ungrounded electrical receptacles. DO NOT use undersized electrical extension cords or wiring. DO NOT use the pump as an air-filtering device for vapors, gases, or particulates. DO NOT start pump without respirator(s) and hose(s) connected to pump. DO NOT use Vortex type cooled respirator...

Herunterladen

Geben Sie zwei Ziffern: