Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Turn the printer off. Connect one end of the parallel cable to the computer, the other to the printer. IMPORTANT: Be sure printer is off before continuing, or the computer will attempt to install the printer driver before the printer is ready. IMPORTANT: Be sure printer is off before continuing, or the computer will attempt to install the printer driver before the printer is ready. Continue with Step 6 on side two. USB Port USB Cable Protective cap Insert the ink tank into the correct slot. (Refer to the color guide on the print head.) Press down until the ink tank clicks into place. Peel back the orange tab and completely remove the plastic wrapper from the yellow ink tank (BCI-3eY). Twist off and discard the orange protective cap. NOTE: To avoid spilling ink, never press on the sides of an ink tank. Insert the remaining three ink tanks into their assigned slots. Close the front cover. Open and pull out the paper rest and the output tray. Print Nozzle Electrical Contacts Lower the gray lock lever until it locks into place. Raise the gray lock lever. Gently slide the print head into the holder. The print head will rest at a slight angle. Do not press it down. Remove the print head from its package. Turn the print head over, then remove the orange protective cap. NOTE: Do not touch the electrical contacts. Plug the power cord into the back of the printer and connect the other end to a power outlet. Open the front cover. The print head holder automatically moves to the center. Remove the protective tape. Write down the serial number located to the right of the print head. You will need this later to register the product. Press the POWER button. Remove the shipping tape from the front and sides of the printer. Protective tape Serial number Shipping Tape Carefully remove all items from the box. Photo Printer Documentation and Software Kit Power Cord Print Head Ink Tanks BCI-3eC Cyan BCI-3eM Magenta BCI-3eBK Black BCI-3eY Yellow NOTE: The “i550 Setup Software & User’s Guide” CD-ROM contains printer drivers, software applications and electronic manuals. 1 2 3 1 5 4 3 1 2 1 2 1 2 1 2 3 4 5 Macintosh 7 Install the Printer Driver (Macintosh®)6 7 Install the Printer Driver (Macintosh®)6 Windows Be sure to TURN THE PRINTER OFF before continuing. NOTE: For Windows® XP, Windows 2000 or Windows NT,® log on to Windows as a member of the Administrators group before continuing. IMPORTANT: If you see the Found New Hardware Wizard, click Cancel. Close all open software applications, then insert the “i550 Setup Software & User’s Guide” CD-ROM. The setup program should run automatically. NOTE: If the setup program does not run automatically, double-click My Computer, then double-click the CD-ROM icon. Read the License Agreement, then click Yes to continue. When the main menu appears, click Install. When the Printer Port window appears, TURN THE PRINTER ON. The software will begin identifying the printer port being used. IMPORTANT: If your computer can not detect a printer port, refer to the Troubleshooting chapter in the i550 Quick Start Guide for instructions. When the driver installation is complete, click Finish. Register your product to ensure product support. Follow the on-screen instructions. When the software menu appears, click Install. When the software installation is complete, click OK, then Exit. To ensure highest quality output, continue with Step 7 Align the Print Head. POWER Lamp Off POWER Button 7 8 61 2 3 4 5 9 10 Install the Printer Driver (Windows®)6 Load a stack of blank paper in the paper rest. Start the alignment procedure. Windows: a. For Windows XP select Start, Settings, then Control Panel, then click on Printers and Other Hardware, then Printers and Faxes. b. Right-click the Canon i550 icon, then click Printing Preferences. c. Click the Maintenance tab, then click the Print Head Alignment icon. d. When asked to start print head alignment, click OK. e. Follow the on-screen instructions to complete print head alignment. Macintosh: a. From the File menu in a software application, click Page Setup. b. Click the Utilities button. c. Select Test Print from the pull down menu. d. Click the Print Head Alignment icon. e. Follow the on-screen instructions to complete print head alignment. Click OK (Windows) or Close (Macintosh) when finished. Before using the printer, align the print head to ensure the best quality printing. QA7-2270-V01/082002A ©2002 Canon U.S.A., Inc. Canon is a registered trademark of Canon Inc. All other products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice. PRINTED IN THAILAND 1 2 3 Align the Print Head7 8 9 1 2 IMPORTANT: Drivers included with this printer support Mac 8.6-9.x. For Mac OS X driver and instructions, go to NOTE: Screen shots may differ depending on the operating system used. Turn on your Mac and insert the “i550 Setup Software & User’s Guide” CD-ROM. Open the Print...