Login:
Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Anleitung Salton, modell WT11LT

Hersteller: Salton
Dateigröße: 117.7 kb
Dateiname: 38582327-1d2c-4d4c-9c0d-deff2db0dfee.pdf
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


obtain maximum enjoyment, please 1. Do not submerge Shower Radio It is water resistant, not waterproof! 2. Insert 3 AA ALKALINE Battery Compartment. 3. Signal Reception. Turn on the Radio and move it around to various locations and positions on the wall to determine good reception. Avoid locations that lie directly in the path of the shower stream. OPERATING INSTRUCTIONS PRODUCT MAY VARY SLIGHTLY FROM ILLUSTRATIONS Radio Tuning Dial Volume Control Dial AM/FM Switch 4 Mounting Screws Mounting Plate 4 Screw Sockets 1 WALL MOUNTING WALL MOUNTING Select a spot smooth as possible, smooth ceramic tile. clean the spot of all soap, other films using a household cleaning solvent such as or nail polish remover. DO NOT use tile cleaner or other wax-based substances. Allow area to dry completely. Room temperature should be at 60 to 70.F. 2. For best results, hold Adhesive Packet (supplied in package) at a 45-degree angle and apply sealant to Mounting Plate, approximately 1/8” bead and 1/4” from edges. Use entire contents. 3. Place Mounting Plate against clean wall surface using enough pressure to displace air, but not adhesive. 4. Slide the Radio onto the secured Mounting Plate. WALL MOUNTING WITH SCREWS 1. Place Mounting Plate against a clean wall surface and mark the spots on the wall where you will be drilling. Remove the Mounting Plate from the wall. 2. Drill 4 holes in the wall that match the placement of the holes in the Mounting Plate. 3. Insert a Screw Socket into each of the 4 holes. 4. Place Mounting Plate against the wall in the correct position and drill in the 4 Screws. 5. Slide the Radio onto the secured Mounting Plate. TUN. VOL. AM FM WALL Adhesive Bead Mounting Plate Battery Compartment TUN. VOL. AM FM Mounting Plate 4 Screw 4 Mounting Sockets Screws 2 ONE- This Salton, Inc. Warranty Duration: This product is warranted aperiod of one (1) year Warranty Coverage: This product is warranted workmanship. This warranty inshipment, unreasonable use, repairs by unauthorized personnel inmaterials or workmanship. This warranty purchasedand operated in the USA, and does not violation of written instructions furnished beenaltered or modified or to damage to products serialnumber removed, altered, defaced or rendered Warranty Disclaimers: This warranty is in lieu of all warranties expressed impliedand no representative or person is authorized to assume otherliability in connection with the sale of our products. There or failure of performance or product failure under any theory of tort, contract orcommercial law including, but not limited to, negligence, gross breach of warranty and breach of contract. Warranty Performance: During the above one-year warranty period, a product with adefect will be either repaired or replaced with a reconditioned comparable atSalton, Inc.’ s option) when the product is returned to the Salton, Inc. facility. The repaired or replacement product will be in warranty for the balance of the yearwarranty period and an additional one-month period. No charge will be made suchrepair or replacement. Service and Repair If service is required, you should first call toll-free 1-800-233-9054 between the hours of 8:00 am and 5:00 pm Central Standard Time and ask for CONSUMER SERVICEstating that you are a consumer with a problem. Please refer to Model WT11LT when you call. In-Warranty Service (USA) for an appliance covered under the warranty period, nocharge is made for service or postage. Call for pre-paid return mailing label. (U.S. Customers Only) Out-of- Warranty Service: A flat rate charge by model is made for out-of-warranty service. Include $ 6.00 (U.S.) for return shipping and handling. Salton, Inc. cannot assume responsibility for loss or damage during incoming shipment. For your protection, carefully package the product for shipment and insure it with the carrier. Be sure to enclose the following items with your appliance: any accessories related to your problem; your full return address and daytime phone number; a note describing the problem you experienced; a copy of your sales receipt or other proof of purchase to determine warranty status. C.O.D. shipments cannot be accepted. Return the appliance to: ATTN: Repair Department, Salton, Inc. 708 South Missouri St. Macon MO, 63552 For more information on Salton, Inc. products, visit our website: eSalton.com, or you can email us at: salton@saltonusa.com LOONEY TUNES, characters, names and all related indicia are trademarks of Warner Bros. © 2000. Printed in China ©2000 Salton, Inc. ...


Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien