Stimmen - 2, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Samsung Dateigröße: 7.97 mb Dateiname: Unterrichtssprache:

Dieses Gerät hat auch andere Anweisungen:

Drucker - SCX-3406HW (8.49 mb)

Drucker - SCX-3406HW (9.01 mb)

Drucker - SCX-3406HW (7.85 mb)

2. Using a Network-Connected Machine 168 Wireless network setup -SSID Type: After completing the wireless network connection process, the AP’s SSID information appears on the display. • For models without a display screen, follow the steps below. a Press and hold the (WPS) button on the control panel for about 2 - 4 seconds until the status LED blinks quickly. The machine starts connecting to the wireless network. The LED blinks slowly for up to two minutes until you press the PBC button on the access point (or wireless router). b Press the WPS (PBC) button on the access point (or wireless router). -The light blinks fast on the WPS LED while it is connecting to the access point (or wireless router). -When the machine is successfully connected to the wireless network, the WPS LED light stays on. The Wireless Network Setting Complete window appears. Click Next. 8 Click Next when the Confirm Printer Connection window appears. 9 Select the components to be installed. Click Next. 10 After selecting the components, you can also change the machine name, 11 set the machine to be shared on the network, set the machine as the default machine, and change the port name of each machine. Click Next. After the installation is finished, a window asking you to print a test page 12 appears. If you want to print a test page, click Print a test page. Otherwise, just click Next and go to step 14. If the test page prints out correctly, click Yes. 13 If not, click No to reprint it. If you want to register your machine with the Samusng web site and 14 receive useful information, click On-line Registration. If not, click Finish. Ad hoc via USB cable If you do not have an access point (AP), you may still connect the machine wirelessly to your computer by setting up an ad-hoc wireless network by following the simple steps below. Items to prepare • Network-connected computer • Software CD that was provided with your machine • A machine installed with a wireless network interface • USB cable 2. Using a Network-Connected Machine 169 Wireless network setup Creating the ad hoc network in Windows Check whether the USB cable is connected to the machine. 1 Turn on your computer and the wireless network machine. 2 Insert the supplied software CD into your CD-ROM drive. 3 Select the Wireless Setting and Installation option. 4 Read the License Agreement, and select I accept the terms of the 5 License Agreement. Then, click Next. The software searches the wireless network. 6 If the software has failed to search the network, check if the USB cable is connected properly between the computer and machine, and follow the instructions in the window. After searching the wireless networks, a list of wireless networks your 7 machine has searched appears. If you want to use the Samsung default ad hoc setting, select the last wireless network on the list, Network Name(SSID) is Portthru and Signal is Printer Self Network. Then, click Next. If you want to use other ad hoc settings, select another wireless network from the list. If you want to change the ad hoc settings, click the Advanced Setting button. • Enter the wireless Network Name: Enter the SSID name you want (SSID is case-sensitive). • Operation Mode: Select ad hoc. • Channel: Select the channel. (Auto Setting or 2412 MHz to 2467 MHz). • Authentication: Select an authentication type. Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security. Shared Key: Authentication is used. A device that has a proper WEP key can access the network. • Encryption: Select the encryption (None, WEP64, WEP128). • Network Key: Enter the encryption network key value. • Confirm Network Key: Confirm the encryption network key value. • WEP Key Index: If you are using WEP Encryption, select the appropriate WEP Key Index. The wireless network security window appears when the ad hoc network has security enabled. Select Open System or Shared Key for the authentication and click Next. • WEP (Wired Equivalent Privacy) is a security protocol preventing unauthorized access to your wireless network. WEP encrypts the data portion of each packet exchanged on a wireless network using a 64-bit or 128-bit WEP encryption key. The window showing the wireless network setting appears. Check the 8 settings and click Next. 2. Using a Network-Connected Machine 170 Wireless network setup Before entering the IP address for the machine, you must know the computer’s network configuration information. If the computer’s network configuration is set to DHCP, the wireless network setting should also be DHCP. Likewise, if the computer’s network configuration is set to Static, the wireless network setting should also be Static. If your computer is set to DHCP and you want to use the Static wireless network setting, you must contact the network administrator to get the static IP address. • For the DHCP method If the IP address assignment method is DHCP, check if DHCP is shown in the Wireless N...

Herunterladen

Geben Sie zwei Ziffern: