Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
Using SyncThru™ Web Service Before starting wireless parameter configuration, check the cable connection status. 2. Using a Network-Connected Machine 181 Wireless network setup Check whether or not the network cable is connected to the machine. If 1 not, connect the machine with a standard network cable. Start a web browser such as Internet Explorer, Safari, or Firefox and enter 2 your machine’s new IP address in the browser window. For example, Click Login on the upper right of the SyncThru™ Web Service website. 3 Type in the ID and Password then click Login. 4 • ID: admin • Password: sec00000 When the SyncThru™ Web Service window opens, click Network 5 Settings. Click Wireless > Wizard. 6 Wizard will help you setup the wireless network configuration. However, if you want to set the wireless network directly, select Custom. Select the one Network Name(SSID) in the list. 7 • SSID: SSID (Service Set Identifier) is a name that identifies a wireless network, access points, and wireless devices attempting to connect to a specific wireless network must use the same SSID. The SSID is case sensitive. • Operation Mode: Operation Mode refers to the type of wireless connections (see "Wireless network name and network key" on page 156). - Ad-hoc: Allows wireless devices to communicate directly with each other in a peer-to-peer environment. -Infrastructure: Allows wireless devices to communicate with each other through an access point. If your network’s Operation Mode is Infrastructure, select the SSID of the access point. If the Operation Mode is Ad-hoc, select the machine’s SSID. Note that “portthru” is the default SSID of your machine. Click Next. 8 If the wireless security setting window appears, enter the registered password (network key) and click Next. The confirmation window appears, please check your wireless setup. If 9 the setup is right, click Apply. 2. Using a Network-Connected Machine 182 Wireless network setup Disconnect the network cable (standard or network). Your machine should then start communicating wirelessly with the network. In case of Ad-hoc mode, you can use a wireless LAN and wired LAN simultaneously. Turning the Wi-Fi network on/off If your machine has a display, you can also turn on/off the Wi-Fi from the machine’s control panel using the Network menu. Check whether the network cable is connected to the machine. If not, 1 connect the machine with a standard network cable. Start a web browser such as Internet Explorer, Safari, or Firefox and enter 2 your machine’s new IP address in the browser window. For example, Click Login on the upper right of the SyncThru™ Web Service website. 3 Type in the ID and Password, then click Login. 4 • ID: admin • Password: sec00000 When the SyncThru™ Web Service window opens, click Network 5 Settings. Click Wireless > Custom. 6 You can also turn the Wi-Fi network on/off. Setting the Wi-Fi Direct for mobile printing Wi-Fi Direct is an easy-to-setup peer-to-peer connecting between method for your printer and a mobile device that provides a secure connection and better throughput than ad hoc mode. With Wi-Fi Direct, you can connect your printer to a Wi-Fi Direct network while concurrently connecting to an access point, You can also use a wired network and a Wi-Fi Direct network simultaneously so multiple users can access and print documents both from Wi-Fi Direct and from a wired network. • You cannot connect to the internet through the printer’s Wi-Fi Direct. • The supported protocol list may differ from your model, Wi-Fi Direct networks do NOT support IPv6, network filtering, IPSec, WINS, and SLP services. Setting up Wi-Fi Direct You can enable Wi-Fi Direct feature by one of the following methods. 2. Using a Network-Connected Machine 183 Wireless network setup From the USB cable-connected computer(recommended) • When setting from the supplied software CD, see the access point via USB cable. - Windows user, see "Access point via USB cable" on page 163. - Macintosh user, see "Access point via USB cable" on page 172. • After the driver installation is complete, Samsung Easy Printer Manager can be set and changes in the Wi-Fi Direct can be made. Samsung Easy Printer Manager is Available for Windows and Macintosh OS users only. -From the Start menu, select Programs or All Programs > Samsung Printers > Samsung Easy Printer Manager > Device Settings > Network. . Wi-Fi Direct On/Off: Select On to enable. . Device Name: Enter the printer’s name for searching for your printer on a wireless network. By default, the device name is the model name. . IP Address: Enter the IP address of the printer. This IP address is used only for the local network and not for the infrastructure wired or wireless network. We recommend using the default local IP address (the default local IP address of the printer for Wi-Fi Direct is 192.168.3.1 ) . Group Owner: Activate this option to assign the printer the Wi-Fi Direct group’s owner. The Group Owner acts similar to a wireless access point....
Dieses Handbuch ist für folgende Modelle:Drucker - SCX-3206W (7.97 mb)
Drucker - SCX-3400 (7.97 mb)
Drucker - SCX-3400/ALG (7.97 mb)
Drucker - SCX-3400/STS (7.97 mb)