Stimmen - 1, Durchschnittliche Bewertung: 3 ( )

Hersteller: Samsung Dateigröße: 20.68 mb Dateiname: Unterrichtssprache:

Dieses Gerät hat auch andere Anweisungen:

Drucker - CLX-9256NA (20.07 mb)

Drucker - CLX-9256NA (834.04 kb)

Drucker - CLX-9256NA (20.23 mb)

Drucker - CLX-9256NA (887.03 kb)

2.Press On to activate this feature. 3.Enter the number 3 using the numeric keypad on the control panel 4.Press OK. Receiving in secure receiving mode 1.Press Machine Setup > Application Settings > Fax Settings > Secure Receive from the display screen. The Secure Receive mode can only be configured by an authorized user who has registered an ID and a password on the machine. When the machine requests, enter the ID and password. 2.Press a fax line if your machine has multiple fax lines. 3.Press On to active this feature. When the machine receives a fax in this mode, Print will be activated. If you want to print the secured faxes, press Print. All secured faxes will be printed out. 4.If you want incoming faxes to go into memory always, press Whole Day. Otherwise, go to the next step. 5.Set Start Time by pressing the + and - buttons. Press OK. 6.Press End Time, and set the specific end time using the up/down or left/right arrows. Then press OK. 7.Press OK from the display screen. To deactivate the Secure Receive feature, press Off. In this case, the received fax will be printed out. Selecting a received fax output tray 1.Press Machine Setup > Application Settings > Fax Settings > Received Fax Printing > Output Tray from the display screen. 2.Press the appropriate tray. 3.Press OK. Printing received faxes on both sides of the paper 1.Press Machine Setup > Application Settings > Fax Settings > Received Fax Printing > Duplex from the display screen. 2.Press the appropriate option. Prints on only one side of the paper. Prints on both sides of the paper; however, the binding will be the long edge. Prints on both sides of the paper; however, the binding will be the short edge. 3.Press OK. Printing received faxes to the right tray (face up) 1.Press Machine Setup > Application Settings > Fax Settings > Received Fax Printing > Output Tray > Right Tray(Face-Up) from the display screen. 2.Press OK. Receiving faxes in memory Adjusting the document settings The document setting herein is for the current job only. If you want to change the default settings on document settings, refer to Machine Setup > Application Settings > Fax Settings > Default Value. Selecting the size of originals 1.Press the Advanced tab > Original Size from the display screen.. 2.Press the appropriate option. You can change the paper list on the display screen pressing inch Size or mm Size. The paper list is divided into the available A/B size type and letter size type paper in this machine. Automatically detects the size of originals, but this option supports only when originals are Letter-, Ledger-, Legal-, Statement-, A3-, A4-, A5-, B4-, or JIS B5-sized. Allows you to easily select values commonly used. 3.Press OK from the display screen. Faxing on both sides of originals 1.Press the Advanced tab > Duplex, then set the original orientation. 2.Press the appropriate option. For originals that are printed on one side only. For originals that are printed on both sides. For originals that are printed on both sides, but the back is rotated 180 degrees. To use 2 Sided, Book and 2 Sided, Calendar, load the originals on the DADF. If the machine cannot detect the original on the DADF, it automatically changes the option to 1 Sided. 3.Press OK from the display screen. Selecting the orientation of originals 1.Press the Advanced tab > Original Orientation, then set the original orientation. 2.Press the appropriate option. Select this setting for an original document loaded with the top toward the back of the machine. Select this setting for an original document loaded into the DADF with the top of the original document toward the left side of the machine, or an original document placed on the scan glass with the top of the original document toward the right side of the machine. 3.Press OK from the display screen. Changing the resolution Usually recommended for originals with text. This option will reduce the transmission time. Recommended for the originals containing small characters, thin lines, or text that was printed using a dot-matrix machine. Recommended for originals containing fine detail. This option is enabled only if the receiving machine also supports Super Fine resolution. Recommended for originals containing extremely fine detail. This option is enabled only if the receiving machine also supports Ultra Fine resolution. When your machine is set to the Super Fine or Ultra Fine resolution and the fax machine with which you are communicating does not support the Super Fine or Ultra Fine resolution, the machine transmits using the highest resolution mode supported by the other fax machine. Selecting the type of originals 1.Press the Image tab > Original Type from the display screen. 2.Press the appropriate option. For originals with text or line art. For originals with both text and photographs together. For originals that are a continuous tone photograph. Changing the darkness 1.Press the Basic tab > Darkness from the display screen. 2.Press left/rig...

Herunterladen

Geben Sie zwei Ziffern: