Stimmen - 4, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Lexmark Dateigröße: 2.33 mb Dateiname: Unterrichtssprache:

Use of controls or adjustments or performance oh procedures other than those specified herein may result in hazardous radiation exposure0 This product uses a printing process that heats the print media, and the heat may cause the media to release emissions0 You must understand the section in your operating instructions that discusses the guidelines for selecting print medi< to avoid the possibility of harmful emissions0 CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hoO component, allow the surface to cool before touching0 Use care when you replace a lithium battery0 CAUTION—POTENTIAL INJURY: There is a danger of explosion if a lithium battery is incorrectly replaced0 Replace it only with the same or an equivalent type of lithium battery. Do not recharge, disassemble, or incinerat@ a lithium battery. Discard used batteries according to the manufacturer's instructions and local regulations0 CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or mor@ trained personnel to move it safely0 CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injur{ or printer damage< • Turn the printer off using the power switch, and then unplug the power cord from the wall outlet0 • Disconnect all cords and cables from the printer before moving it0 • Lift the printer off of the optional drawer and set it aside instead of trying to lift the drawer and printer at th@ same time0 Note: Use the handholds located on both sides of the printer to lift it off the optional drawer0 Use only the power cord provided with this product or the manufacturer's authorized replacement0 Use only the telecommunications (RJ-11) cord provided with this product or a 26 AWG or larger replacement wheI connecting this product to the public switched telephone network0 CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memor{ devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from th@ wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well and unplug any cables going into the printer0 CAUTION—SHOCK HAZARD: Make sure that all external connections (such as Ethernet and telephone systeo connections) are properly installed in their marked plug-in ports0 This product is designed, tested, and approved to meet strict global safety standards with the use of specifie manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is noO responsible for the use of other replacement parts0 CAUTION—POTENTIAL INJURY: Do not twist, bind, crush, or place heavy objects on the power cord. Do noO subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furnitur@ and walls. If the power cord is misused, a risk of fire or electrical shock results. Inspect the power cord regularl{ for signs of misuse. Remove the power cord from the electrical outlet before inspecting it0 Safety informatiol 11 Refer service or repairs, other than those described in the user documentation, to a professional service person0 CAUTION—SHOCK HAZARD: To avoid the risk of electric shock when cleaning the exterior of the printer, unplui the power cord from the wall outlet and disconnect all cables from the printer before proceeding0 CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up this producO or make any electrical or cabling connections, such as the fax feature, power cord, or telephone, during a lightnini storm0 SAVE THESE INSTRUCTIONS. Safety informatiol 12 Learning about the printer Learning about the printer Finding information about the printer Setupinformation Description Where to find The Setup information gives you instructions for settingup the printer. Follow the set of instructions for local, network, or wireless, depending on what you need. You can find the Setup information in the printer box or on theLexmark Web site at Wireless Setup Guide Description Where to find If your printer has built-in wireless functionality, aWireless Setup Guide gives you instructions forconnecting the printer wirelessly. You can find the Wireless Setup Guide in the printer box or onthe Lexmark Web site at Help Description Where to find The Help gives you instructions for using the software.While in any Lexmark software program, click Help, Tips . Help, or Help . Help Topics. Customer support Description Where to find (North America) Where to find (rest of world) Telephone support Call us aO • US: 1-800-332-4122 Monday–Friday (8:00 AM–11:00 PM ET Saturday (Noon–6:00 PM ET • Canada: 1-800-539-627 Monday–Friday (8:00 AM–11:00 PM ET Saturday (Noon–6:00 PM ET • Mexico: 001-888-377-0065 Monday–Friday (8:00 AM–8:00 PM ET Note: Telephone numbers and supporO times may change without notice...

Herunterladen

Geben Sie zwei Ziffern: