Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
. • If the plugs are not inserted into the B jacks firmly, you may not be able to listen to the sound of the tape deck. The plugs of the audio connecting cords may be tight. Insert the plugs at the point shown in “How to insert the plugs” in step 2. Insert to here. Playing a tape You can use any type of tape, TYPE I (normal), TYPE II (CrO2) or TYPE IV (metal), since the tape deck automatically detects the tape type (ATS1)). 1) ATS: Automatic Tape Selection. Tape deck 2 § 4 O TC-TX333 0/) 3DOLBY NR2) Cassette indicator p» The remote supplied with the DHC-MD333 1 FUNCTION TAPE»/· TAPEp TAPE0/) TAPEP VOLUME 2) This tape deck is equipped with the Dolby B-type noise reduction system. 1 Press on the DHC-MD333 to turn on the DHC-MD333 component system. The tape deck turns on automatically. 2 Insert a recorded tape. With the side you want to play facing up 3 Set DIRECTION to Ato play one side. Set it to a3) to play both sides. 4 Press a. Press »to play the bottom side. FUNCTION switches to “TAPE” automatically, then the tape starts playing. 3) The tape deck stops automatically after repeating the sequence five times. To play a tape using the DHC-MD333 component system Do the following operation in step 4; 1 Press FUNCTION until “TAPE” appears in the display. 2 Press TAPEaon the remote. To play the bottom side, press TAPE»on the remote. Other operations Tips To Press Stop playing p(or TAPEp*). Pause .(or TAPEP*). Press again to resume playing. Fast-forward p, then )(or TAPE)*) for the top side. p, then 0(or TAPE0*) for the bottom side. Rewind p, then 0(or TAPE0*) for the top side. p, then )(or TAPE)*) for the bottom side. Find the )(or TAPE)*) for the top succeeding side. track (AMS**) 0(or TAPE0*) for the bottom side. Find the 0(or TAPE0*) for the top preceding track side. (AMS**) )(or TAPE)*) for the bottom side. Remove the ¤on the tape deck. cassette Adjust the VOLUME +/– on the remote volume (or turn VOLUME on the DHC-MD333). * Use the remote supplied with the DHC-MD333. **The Automatic Music Sensor (AMS) feature detects a blank space of more than four seconds between tracks to locate tracks quickly. • When you press on the tape deck, only the tape deck turns on. Press on the DHC-MD333 to turn on the DHC-MD333 component system. • The cassette indicator lights up in red when a cassette is inserted and goes off when no cassette is inserted. • Pressing aor »when the tape deck is off automatically turns on the tape deck and starts playing a tape if there is a cassette inserted (One Touch Play). • Inserting the tape when the power is off automatically turns on the tape deck only. Press on the DHC-MD333 to turn on the DHC-MD333 component system. • You can switch from another source to the tape deck just by pressing aor »(Automatic Source Selection). • To start playing automatically from the beginning of the tape after fast winding (Auto Play), press awhile holding down 0(for the top side) or press »while holding down )(for the bottom side). • When you want to reduce the hiss noise in low- level high-frequency signals, set DOLBY NR to ON. • Using the timer function on the DHC-MD333, you can wake up to music at a preset time. For details, refer to “Wake up to music” in the DHC-MD333 component system Instruction Manual. When you set the Wake-up timer, DOLBY NR must be set on the tape deck. Note The AMS feature may not work in the following cases: — the blank space between tracks is four seconds or less. — the sound source recorded on the right channel is different from that on the left channel as with a KARAOKE tape. — low volume or low sound continues for a long time. — the TV is too close to the tape deck. Recording a CD — CD Synchro Recording The CD SYNC button lets you record from a CD to a tape easily. You can use TYPE I (normal) or TYPE II (CrO2) tape, since the tape deck automatically detects the tape type. Tape deck TC-TX333 2 · 6 DOLBY NR* Cassette 5 »p 4 indicator The remote supplied with the DHC-MD333 1 TAPEp * This tape deck is equipped with the Dolby B-type noise reduction system. 1 Press on the DHC-MD333 to turn on the DHC-MD333 component system. The tape deck turns on automatically. 2 Insert a blank tape. With the side you want to record on facing up 3 Place a CD on the disc tray of the DHC-MD333. 4 Set DIRECTION to Ato record on one side. Set it to ato record on both sides. 5 Press CD SYNC on the tape deck. The tape deck stands by for recording and the CD player stands by for playback. The indicators on the CD SYNC, rREC, a(for the top side) and .buttons light up. If you want to record starting from the bottom side, press »(for the bottom side) so the indicator on the »button lights up. 6 Press .on the tape deck. Recording starts. To stop recording Press pon the tape deck or TAPEpon the remote. Tips • When you press on the tape deck, only the tape deck turns on. Press on the DHC-MD333 to turn on the DHC-MD333 component system. • Inserting the tape when the power is off automatically turns on the tape deck...