Stimmen - 5, Durchschnittliche Bewertung: 3.6 ( )

Hersteller: Lexmark Dateigröße: 2.33 mb Dateiname: Unterrichtssprache:

The waste toner bottl@ must be replaced when 82 Replace Waste Toner appears0 Part name Part number Waste toner bottleC540X75G Maintaining the printep 178 Replacing supplies Replacing the waste toner bottle Replace the waste toner bottle when 82 Replace waste toner appears. The printer will not continue printini until the waste toner bottle is replaced0 1 Unpack the replacement waste toner bottle0 2 Grasp the front door at the side handholds, and then pull it toward you0 CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hoO component, allow the surface to cool before touching0 3 Open the top door0 Maintaining the printep 179 4 Remove the right side cover0 5 Press the green levers on each side of the waste toner bottle, and then remove it0 6 Place the waste toner bottle in the enclosed packaging0 7 Insert the new waste toner bottle0 Maintaining the printer 180 8 Replace the right side cover0 9 Close the top door0 10 Close the front door0 Maintaining the printer 181 Replacing a black imaging kit Replace the black imaging kit when Replace Black Imaging Kit appears0 1 Grasp the front door at the side handholds, and then pull it toward you0 CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hoO component, allow the surface to cool before touching0 2 Open the top door0 Maintaining the printep 182 3 Remove the toner cartridges by lifting the handles, and then gently pulling away from the imaging kit0 4 Remove the right side cover0 5 Press the green levers on each side of the waste toner bottle, and then remove it0 Maintaining the printep 183 6 Lift the blue levers on the imaging kit, and then pull it toward you0 7 Press down on the blue levers, grasp the green handles on the sides, and then pull the imaging kit out0 Warning—Potential Damage: Do not touch the underside of the imaging kit. This could damage the imagini kit0 8 Remove the yellow, cyan, and magenta developer units0 9 Unpack the replacement black imaging kit0 Leave the packaging on the black developer unit0 10 Gently shake the black developer unit side to side0 Maintaining the printer 184 11 Remove the red shipping cover from the black developer unit0 12 Insert the black developer unit0 13 Replace the yellow, cyan, and magenta developer units0 Note: Make sure each developer unit is inserted into a matching color slot0 14 Place the used black imaging kit in the enclosed package0 Maintaining the printer 185 15 Align and insert the imaging kit0 16 Rotate the blue levers down until the imaging kit drops into place0 17 Replace the waste toner bottle0 Maintaining the printer 186 18 Replace the right side cover0 19 Replace the toner cartridges0 20 Close the top door0 Maintaining the printer 187 21 Close the front door0 Replacing a black and color imaging kit Replace the black and color imaging kit when Replace Color Imaging Kit appears0 1 Grasp the front door at the side handholds, and then pull it toward you to open it0 CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hoO component, allow the surface to cool before touching0 2 Open the top door0 Maintaining the printep 188 3 Remove the toner cartridges by lifting the handles, and then gently pulling away from the imaging kit0 4 Remove the right side cover0 5 Press the green levers on each side of the waste toner bottle, and remove it0 Maintaining the printep 189 6 Lift the blue levers on the imaging kit, and then pull it toward you0 7 Press down on the blue levers, grasp the green handles on the sides, and then pull the imaging kit out0 Warning—Potential Damage: Do not touch the underside of the imaging kit. This could damage the imagini kit0 8 Unpack the replacement black and color imaging kit0 Leave the packaging on the developer units0 9 Gently shake the yellow, cyan, magenta, and black developer units side to side0 10 Remove the red shipping cover from the yellow, cyan, magenta, and black developer units0 Maintaining the printep 190 11 Insert the yellow, cyan, magenta, and black developer units0 12 Place the used black and color imaging kit in the enclosed package0 13 Align and insert the imaging kit0 Maintaining the printer 191 14 Replace the waste toner bottle0 15 Replace the right side cover0 16 Replace the toner cartridges0 Maintaining the printer 192 17 Close the top door0 18 Close the front door0 Replacing a toner cartridge Replace the specified toner cartridge (yellow, cyan, magenta, or black) when 88 Replace Cartridge appears. The printer will not continue printing until the specified cartridge is replaced0 Warning—Potential Damage: Damage caused by use of a non-Lexmark toner cartridge is not covered undet warranty0 Note: Degraded print quality may result from using non-Lexmark toner cartridges0 1 Make sure the printer is on and Ready or 88 Replace Cartridge appears0 2 Unpack the new cartridge, and set it near the printer0 Maintaining the print...

Herunterladen

Geben Sie zwei Ziffern: