Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
3 Plug the cable from the AC adapter (3) into the DC IN port (4) on the computer. ! The shape of the DC In plug varies depending on the AC adapter. Getting Started > Connecting a Power Source n 20 N . To disconnect your computer completely from an AC power source, unplug the AC adapter from the AC outlet. Make sure that an AC outlet is easily accessible. If you do not intend to use your computer for an extended period of time, place the computer into Hibernate mode. See Using Hibernate Mode (page 34). Getting Started > Using the Battery Pack n 21 N Using the Battery Pack The battery pack is already installed on your computer at the time of delivery but is not fully charged. ! Do not use your computer without installing the battery pack as it may cause the computer to malfunction. Installing/Removing the Battery Pack . In order to distinguish the battery pack which is installed on your computer at the time of delivery from an extended battery pack (supplied with selected models only), it may be referred to as the primary battery pack in this manual. For detailed instructions on how to attach and charge an extended battery pack, see the manual that came with your extended battery pack. To install the battery pack 1 Turn off the computer, close the LCD screen lid, and unplug the AC adapter. 2 Unscrew the two screws (1), slide the bottom cover in the direction of the arrow (2), and remove the cover. ! Be careful not to lose the removed screws. Be careful not to touch the wires and the projections inside the bottom cover. Getting Started > Using the Battery Pack n 22 N Slide the battery pack into the battery compartment in the direction of the arrow. Push the battery pack down into the compartment until the projection (3) clicks into place. Getting Started > Using the Battery Pack n 23 N Replace the cover. Make sure all the tabs on the cover are slid in place and push the cover in the direction of the arrow. There are five tabs on VPCSA and VPCSB Series and six tabs on VPCSE Series. Replace and tighten the removed screws. Getting Started > Using the Battery Pack n 24 N To remove the battery pack ! You will lose all unsaved data if you remove the battery pack while your computer is on and not connected to the AC adapter. 1 Turn off the computer, close the LCD screen lid, and unplug the AC adapter if plugged. 2 Unscrew the two screws (1), slide the bottom cover in the direction of the arrow (2), and remove the cover. ! Be careful not to lose the removed screws. Getting Started > Using the Battery Pack n 25 N 3 Pull and hold the tab in the direction of the arrow (3) and pull the battery pack in the direction of the arrow (4). Slide the battery pack away from the computer in the direction of the arrow. Getting Started > Using the Battery Pack n 26 N . If your computer does not recognize the battery pack, turn off your computer and push and hold the battery off button for about three seconds with a thin, straight object (such as a paper clip). If this does not solve the problem, remove the battery pack and install it once again. If an extended battery pack is attached to the computer, turn off the computer and remove the extended battery pack. If this does not solve the problem, push and hold the battery off button for about three seconds. If the problem persists, remove both battery packs and install them once again. ! For your safety, it is highly recommended that you use genuine Sony rechargeable battery packs and AC adapters that meet the quality assurance standard, supplied by Sony for your VAIO computer. Some VAIO computers may only function with a genuine Sony battery pack. Getting Started > Using the Battery Pack ...
Dieses Handbuch ist für folgende Modelle:PC Notebooks - VPCSA3C5E (3.09 mb)
PC Notebooks - VPCSA3J1E_XI (3.09 mb)
PC Notebooks - VPCSA3L9E_XI (3.09 mb)
PC Notebooks - VPCSA3M9E_XI (3.09 mb)