Stimmen - 1, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
This system partition uses 100 MB of your total built- in storage device volume. . You must enable the TPM in the BIOS setup screen in order to turn on BitLocker Drive Encryption. . Do not encrypt data on a storage device (such as a USB flash memory device) on which a recovery key is stored using BitLocker Drive Encryption. Using Your VAIO Computer > Using the TPM n 97 N To unlock the encrypted data with a recovery key stored on a USB flash memory device To unlock the encrypted data with a recovery key stored on a USB flash memory device, your system needs to access the USB flash memory device when you boot the computer. Follow these steps to configure the boot order in the BIOS setup screen: ! You cannot use USB devices if you disable the USB ports in the BIOS setup screen. To enable the ports, follow the steps in Protecting Data from Unauthorized Use (page 131). 1 Connect a USB flash memory device. 2 Turn on the computer and press the F2 key repeatedly until the VAIO logo disappears. The BIOS setup screen appears. If the screen does not appear, restart the computer and try again. 3 Press the < or , key to select the Security tab, the M or m key to select Change TPM State, and then the Enter key. 4 Press the M or m key to select Enable and then the Enter key. 5 Press the < or , key to select Boot and then select Enabled for External Device Boot. 6 Press the M or m key to select Boot Priority and then the Enter key. 7 Press the F5 or F6 key to change the boot device order so that Internal Hard Disk is listed higher than External Device. ! You need to move Internal Optical Drive to the top of the list to recover the computer system using your Recovery Media. 8 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key. 9 After your system restarts, select Execute in the confirmation window and then press the Enter key. 10 Follow the instructions in Windows Help and Support to enable BitLocker Drive Encryption. 11 Save the recovery password to the USB flash memory device in the window for saving the recovery password. 12 Follow the on-screen instructions. The encryption process will start. Using Your VAIO Computer > Using the TPM n 98 N ! Updating your BIOS with updating software, such as the VAIO Update, changes the BIOS settings back to the default. You need to repeat the steps above again. It takes several hours to complete the encryption process. Using Peripheral Devices > n 99 N Using Peripheral Devices You can add functionality to your VAIO computer by using the various ports on the computer. . Connecting a Port Replicator (page 100) . Connecting External Speakers or Headphones (page 107) . Connecting an External Display (page 108) . Selecting Display Modes (page 114) . Using the Multiple Monitors Function (page 115) . Connecting a USB Device (page 117) Using Peripheral Devices > Connecting a Port Replicator n100 N Connecting a Port Replicator Attaching an optional port replicator enables you to connect additional peripherals to your computer, such as a printer and an external display. Locating Ports on the Port Replicator A DC IN indicator Illuminates while the port replicator is powered. B DC IN port (page 101) C USB ports*1 (page 117) D LAN ports*2 (page 67) E HDMI output port (page 111) F MONITOR port (page 109) G Security slot *1 Compliant with the USB 2.0 standard. *2 The port replicator has a protective sticker covering each LAN port. Connect a 10BASE-T, 100BASE-TX, 1000BASE-T cable to the LAN port. Using an incorrect cable, such as a phone cable, may result in an electric current overload that can cause a malfunction, excessive heat, or fire in the LAN port. ! While the port...
Dieses Handbuch ist für folgende Modelle:PC Notebooks - VPCSA3C5E (3.09 mb)
PC Notebooks - VPCSA3J1E_XI (3.09 mb)
PC Notebooks - VPCSA3L9E_XI (3.09 mb)
PC Notebooks - VPCSA3M9E_XI (3.09 mb)