Stimmen - , Durchschnittliche Bewertung:
(
)
)
Hersteller: Yamaha
Dateigröße: 18.35 mb
Dateiname:
Unterrichtssprache:
Das Dokument wird geladen, bitte warten
 |
Das Dokument wird geladen, bitte warten
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
button at the left to open the GPI OUT PORT ASSIGN window; from the list, select the User Defined key bank (A–D) and number (1–25), and how the trigger signal will be transmitted. As the transmission method for the trigger signal, you can select either Latch (switch between active/inactive each time the key is pressed) or Unlatch (active only while the key is pressed). Q TALLY This area indicates the state of other Tally output functions assigned as triggers to each port. When you execute the corresponding operation on the PM5D, a control signal will be output from the corresponding GPI OUT port. This control signal will be held until you defeat the above operation (or until that GPI OUT port receives a different trigger). To edit the settings, click the button at the left to open the GPI OUT PORT ASSIGN window, and select one of the following functions. Function PM5D operation NO ASSIGN No assignment POWER ON The PM5D’s power is turned on SOLO ON [SOLO] key is turned on GPI IN 1 FUNCTION The function assigned to GPI IN port 1 becomes active GPI IN 2 FUNCTION The function assigned to GPI IN port 2 becomes active GPI IN 3 FUNCTION The function assigned to GPI IN port 3 becomes active GPI IN 4 FUNCTION The function assigned to GPI IN port 4 becomes active PREVIEW ON SCENE MEMORY section [PREVIEW] key is turned on CUE ON [INPUT ONLY] Input channel [CUE] key is turned on CUE ON [DCA ONLY] DCA [CUE] key is turned on CUE ON [OUT- PUT ONLY] Output channel [CUE] key is turned on CUE ON Any [CUE] key is turned on FADER START screen Here you can make settings for the Fader Start function which lets you use input channel faders to control GPI OUT ports or external devices. FADER START 1 2 3 4 A INPUT CH (Input channel) This area shows the number and name of the channels (input channels, ST IN channels) for which you can make settings. When you click a line to select it, that line will be highlighted in the center of the list. B OUTPUT TYPE C PARAMETER Indicates the type of signal that will be output when you operate the corresponding fader, and option parameters for it. To edit the setting, click the button at the left of the OUTPUT TYPE field to open the FADER START ASSIGN window. You can select the following output types and parameters. • NO ASSIGN No assignment. • GPI A trigger will be sent to the specified GPI OUT port according to the fader operation of the corresponding channel, and a control signal will be output. (The polarity of the control signal will be as specified by the settings in the GPI screen.) If this output type is selected, you can choose from the following two option parameters. FADER START . . . GPI OUT port from which the trigger is sent when the fader changes from below –60 dB to exceed –60 dB. Input Output Globalfunctions Function Information Appendices functionsfunctions menu in the PM5D/PM5D-RH Owner’s Manual Reference section 179 MIDI REMOTE function MIDI REMOTE function Note that the GPI-related settings you make in the FADER START screen are linked with the FADER START field of the GPI screen. For example, if in the FADER START screen you specify different ports for the FADER START parameter and FADER STOP parameter of a certain channel, the FADER START field of the GPI screen will be assigned to the corresponding channel (Fader Mode= FADER START/FADER STOP) of those ports. (The opposite also applies.) •MMC An MMC command will be sent from the currently- enabled MIDI port according to the fader operation of the corresponding channel. (The MIDI transmit port is selected in the MIDI SETUP screen.) An MMC PLAY command is transmitted when the fader changes from below –60 dB to –60 dB or higher, and an MMC STOP command is transmitted when the fader reaches –. dB. If this output type is selected, you can use an option parameter to specify the MMC device ID number (1– 127 or ALL). •RS422 An RS422 protocol command will be sent from the RS422 REMOTE connector according to the fader operation of the corresponding channel. An RS422 protocol PLAY command is transmitted when the fader changes from below –60 dB to –60 dB or higher, and an RS422 protocol STOP command is transmitted when the fader reaches –. dB. . D CLEAR ALL Clears the Output Type field assignments of all channels. If the same port is specified for the FADER START parameter and the FADER STOP parameter, the GPI screen FADER START field will be assigned to the channel corresponding to that port (Fader Mode= FADER TALLY). (The opposite is also true.) . PM5D/PM5D-RH Owner’s Manual Reference section TRANSPORT screen TRANSPORT screen TRANSPORT A MMC DEVICE No. Indicates the device ID number of the external device to be controlled via MMC. To change this setting, click the / buttons at left and right to choose from the range 1–127 or ALL (applies to all device ID numbers). B RS422 DATA FORMAT Select the format (P2 or DENON) of the RS422 commands sent from the RS422 REMOTE connector. When you click this button, a confirmation message will app...
Dieses Handbuch ist für folgende Modelle:Musikinstrumente - PM5D (18.35 mb)