Stimmen - 4, Durchschnittliche Bewertung: 3.3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
2 Double-click “setup.exe.” A setup dialog of M7CL Editor is displayed. 3 Follow the on-screen instructions to install the software. n For specific instructions on using the software, refer to the PDF manual from the [HELP] menu in each program. Uninstall (removing the installed application) To remove the installed editors and Studio Manager: Select [START] > [Control Panel] > [Add/Remove Programs] > [Install/Uninstall], then select the application to be removed and click [Add/Remove…]. Follow the on-screen instructions to uninstall the application. n The button names or menus may differ depending on the computer OS. M7CL Editor Installation Guide M7CL Editor Installation Guide 6 Overview of Studio Manager and Total Recall Studio Manager is a cross-platform application that enables you use multiple Editor programs for remotely controlling Yamaha hardware from your computer, and allows you to save the Editor settings for instant recall. You can run Studio Manager as a stand-alone application, or as a plug-in within DAW (digital audio workstation)/ sequencer applications that are compatible with Total Recall, such as Cubase SX 3.0.1 or later. In either case, the basic functionality is the same. For the latest information on compatible DAW applications, refer to the following website. The settings of each editor can be saved and recalled together from Studio Manager or the DAW application. In other words, you can change the settings of your entire system in a single operation by recalling the settings for multiple devices from Studio Manager or your DAW application. This capability is referred to as “total recall.” When you want to save setting files, you can do this from Studio Manager to recall multiple devices at once, or from an individual Editor to recall only a specific device. When you save your settings in your DAW application, the Studio Manager settings will also be saved together with the DAW application file, and can also be recalled in the same way. Getting Started M7CL S90 ES PM5D Studio Manager Open an editor from Studio Manager M7CL Editor application S90 ES Editor application PM5D Editor application Open from a compatible DAW application Start up Studio Manager in stand-alone form Synchronize Synchronize Synchronize Network settings of the M7C L • When connecting the computer to the M7CL directly. You can use the following initial settings. IP address 192.168.0.128 Gateway address 192.168.0.1 Subnet mask 255.255.255.0 • When you connect the computer to the M7CL via LAN. Set the appropriate address in accordance with LAN. Your computer and the M7CL should exist in the same subnet in the same network address. IP address Sets the IP address so that it does not conflict with the IP address of any other device on the network. Gateway address If you set the IP address, the first three numbers are automatically set. Set the last number of the IP address of the gateway when the gateway exists. Set the vacant address when the gateway does not exist.You should set the address in the same subnet as IP address.The address should be set in the same subnet as IP address within LAN in which the subnet is set. Subnet mask Use an initial setting of [255.255.255.0] in LAN environment in which the subnet is not set. In LAN in which the subnet is set, set the address in accordance with the environment. Network settings of computer If you are connecting the M7CL to your computer in a one-to-one connection, we recommend that you make the following settings. IP address 192.168.0.3 Subnet mask 255.255.255.0 Default gateway 192.168.0.1 However, it must not conflict with the IP address of any other device on the network. n The M7CL cannot be directly connected if the IP address is assigned automatically. Please contact your network administrator for further detail. M7CL Editor Installation Guide Starting and setting up Studio Manager You’ll need to perform the following setup in order to use the editors in Studio Manager. 1 Start up Studio Manager. Click the [Start] button, place your mouse cursor over [Programs (All Programs)] > [YAMAHA Studio Manager], then click [Studio Manager]. 2 Set up Studio Manager. For details, refer to the PDF manual, found in the [Help] menu on the Studio Manager. 3 Start up each editor. In the Studio Manager window, double-click the icon for each editor. Studio Manager window 4 Set up each editor. For details, refer to the PDF manual, found in the [Help] menu on each editor. 5 Synchronize each editor with your mixing console. For details, refer to the PDF manual, found in the [Help] menu on each editor. M7CL Editor Installation Guide Troubleshooting When controlling the M7CL from your computer via Ethernet, the M7CL does not operate correctly or no sound is heard. •Have you installed the latest DME-N Network Driver? • Is the Ethernet cable connected correctly? ........................................................................................ M7CL Owne...
Dieses Handbuch ist für folgende Modelle:Musikinstrumente - M7CL-48 (425.89 kb)
Musikinstrumente - M7CL-48ES (425.89 kb)