Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
4 Click OK to close the System Properties window, and then click the Close button to close the Control Panel window. 5 Turn off your Yamaha mixing console, and then use a USB cable to connect its USB TO HOST port to a USB port on your computer. 6 Turn on your Yamaha mixing console. The Found New Hardware Wizard appears. 7 Select “Install software automatically (recommended) (I),” and then click Next. The driver is installed, and the message “Completing the Found New Hardware Wizard” appears. 8 Click Finish, and then restart your computer. Studio Manager for DM2000/DM1000/02R96/01V96—Installation Guide Yamaha CBX Driver (DM2000/02R96 only) 15 Yamaha CBX Driver (DM2000/02R96 only) If you’re connecting your Yamaha mixing console to a serial port on your computer, you’ll need to install the Yamaha CBX driver. If you already have this driver installed, skip this section. 1 Double-click the “Mididrv_” folder on the CD-ROM. 2 Double-click “Setup.exe.” 3 Follow the on-screen instructions to install the software. Studio Manager 1 Double-click the “SM_” folder on the CD-ROM. 2 Double-click the “DM2000,” “02R96,” “DM1000,” or “01V96” folder as appropriate. 3 Double-click “Setup.exe.” 4 Follow the on-screen instructions to install the software. Card Filer (DM2000 only) 1 Double-click the “Card_” folder on the CD-ROM. 2 Double-click “Setup.exe.” 3 Follow the on-screen instructions to install the software. For information on using Card Filer, see the “CardFilerManual.pdf.” This file is installed in the same folder as Card Filer. Studio Manager for DM2000/DM1000/02R96/01V96—Installation Guide 16 Chapter 3—Macintosh Installation 3 Macintosh Installation Acrobat Reader To view the PDF manuals included on the CD-ROM, you need to install the Adobe Acrobat Reader software. If you already have this software installed, skip this section. 1 Start your Macintosh, and then insert the included CD-ROM into your computer’s CD-ROM drive. 2 Double-click the “Acroread_” folder on the CD-ROM. This folder contains Acrobat software in several languages. 3 Double-click the folder of the language you want to install. 4 Double-click “Reader Installer.” (The actual name of the installer depends on the language you select.) 5 Follow the on-screen instructions to install the software. For instructions on using Acrobat Reader, choose Reader Guide from Acrobat Reader’s Help menu. OMS (Open Music System) Studio Manager requires OMS 2.3.3 or later in order to work on Macintosh computers. OMS 2.3.8 is included on the CD-ROM. If you already have OMS 2.3.3 or later installed, skip this section. 1 Start your Macintosh, and then insert the included CD-ROM into your computer’s CD-ROM drive. 2 Double-click the “OMS_” folder on the CD-ROM. 3 Double-click “Install OMS 2.3.8.” 4 Follow the on-screen instructions to install the software. 5 When the installation is complete, click Restart. Note: Once the installation is complete, you may receive an error message warning that the installer did not quit. In this case, choose Quit from the File menu to quit the installer, then restart your computer. 6 Copy the “OMS_2.3_Mac.pdf” from the “OMS_” folder on the CD-ROM to the “Opcode:OMS Applications” folder on your hard disk. This file contains information on using and configuring OMS. Studio Manager for DM2000/DM1000/02R96/01V96—Installation Guide USB MIDI Driver 17 USB MIDI Driver If you’re connecting your Yamaha mixing console to a USB port on your computer, you’ll need to install the Yamaha USB driver. If you already have this driver installed, skip this section. Computer OMS USB cable Driver Studio Manager DM2000/02R96 DM1000/01V96 1 Start your Macintosh, and then insert the included CD-ROM into your computer’s CD-ROM drive. 2 Double-click the “USBdrv_” folder on the CD-ROM. 3 Double-click “Install USB MIDI Driver.” The Install USB MIDI Driver window appears, as shown below. Normally there’s no need to set the Install Location, because the startup disk is selected by default. To select another disk, click the Switch Disk button. Although you can select a destination folder from the pop-up menu, the files are installed in the specified disk’s System Folder regardless, so you can ignore that option. 4 Click Install, and follow the on-screen instructions to install the software. 5 When the installation is complete, click Restart. Studio Manager for DM2000/DM1000/02R96/01V96—Installation Guide 18 Chapter 3—Macintosh Installation Studio Manager 1 Start your Macintosh, and then insert the included CD-ROM into your computer’s CD-ROM drive. 2 Double-click the “SM_” folder on the CD-ROM. 3 Double-click the “DM2000,” “02R96,” “DM1000,” or “01V96” folder as appropriate. 4 Double-click “Install Studio Manager.” 5 Follow the on-screen instructions to install the software. Card Filer (DM2000 only) 1 Start your Macintosh, and then insert the included CD-ROM into your computer’s CD-ROM drive. 2 Double-click the “Card_” folder on the CD-ROM. 3 Double-click “Install Card Filer.” 4 ...