Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
25A 40A GUITAR AMPLIFIER • This operation manual covers the instructions for the SPIRIT-10A, 25A and 40A. (The pictures are ali 4QA's.) • Control Panel 0 © Input Jacks SPIRIT-10A.25A: if you wish to obtain a particularly hard sound or long sustain, connect to the Over Drive. SPIRIT-40A; If your guitar features high output, connect it to Low. © Overdrive (Pull On) Knob (SPIRIT-40A) This knob adjusts the amount of distortion (Overdrive tone), if you pull the knob, distortion effect will be on. Volume Knob This is to set the volume of the preamplifier. @ Master Volume (Pull Presence) Knob SPIRIT-10A,25A,40A: This knob controls the overall volume. SPIRIT-40A: Pulling this knob, you can obtain Presence effect. • Basic Connection © (5) Bass Control Middle Control Treble Control Reverb Control (SPIRIT-25A,40A) Headphones Jack (for Stereo Headphones) Overdrive Foot Switch Jack (SPIRIT-40A) Connecting a footswitch to this jack, you can turn the Distortion effect on or off without using your hands. Reverb Foot Switch Jack (SPIRIT-4GA) Connecting a footswitch to this jack, you can turn the Reverb effect on or off without using your hands. > Pre Out Jack (SPIRIT-40A) Line Out Jack (SPIRIT-1 OA,25A) Provided with this jack, any of the SPIRIT-A series can be set up with an amplifier, PA mixer or tape deck. ) Main In Jack (SPIRIT-40A) An effect device can be connected between the Pre Out Jack and the Main In Jack. > Pilot Lamp This will light up when the unit is turned on, ■ Power Switch To input Jack SPIRIT 40A Foot Switch Jack (Overdrive ON/OFF) Foot Switch Jack (Reverb ON/OFF) - Pre Out Jack I- Main in Jack OVERDRIVE REVERB PREOUT MAININ Effect Device Foot Switch (FS-2) Amplifier Guitar Amplifier Amplifier PA -P......Q _ Guitar Amplifier gff:/.¿VttraMÄL Tape Deck etc. • Example Settings Important Notes 1. Normal • When using the SPIRIT-1 OA or 25A, connect the guitar to NORMAL. • When using the SPIRIT-40A, connect the guitar to HIGH. CULL ON PUtl PHÍSENCE OVERDRIVE VOLUME MASTER VOL. BASS MIDDLE TREBLE REVERB © © © ©) 2. OVER DRIVE I • This patching generates a short sustain Over Drive sound. • When using the SPIRIT-1 OA or 25A, connect the guitar to NORMAL. • When using the SPIRIT-40A, connect the guitar to HIGH. PUU ON ?UU PHÉSENCE OVERDRIVE VOLUME MASTER VOL. BASS MIDDLE TREBLE REVERB @Ш(Ш © © © (@) 3. OVER DRIVE II • When using the SPIRIT-1 OA or 25A, connect the guitar to OVER DRIVE. • When using the SPIRIT-40A, connect the guitar to HIGH. • Adjust the sustain time with the Volume (Over Drive......SPIRIT-40A) knob and the volume level with the Master Volume. PULI ON PULL PPESENCE OVERDRIVE VOLUME MASTER VOL. BASS MIDDLE TREBLE REVERB © © © © rONj Specifications SPIRIT-1 OA SPIRIT-25A SPIRIT-40A * Output 10W(RMS.) 25WÍRMS.) 40WÍR.M.S.) * Speaker 20cm X 1 25cm x 1 ЗОстх 1 * input Jacks Over Drive X 1 (—5ÛdBm/300kü) Normal x 1 (~--26dBm/190kn) Over Drive x 1 (—56dBm/38Qkil) Normal x 1 (~~37dBm/380kü) Highx 1 (—35dBm/500kíl) Lowx 1 (—24dBm/100kn) * Controls Over Drive (Pull On) O Volume О О Q Master Volume О О O (Pull Presence) Bass о О O Middle о О O Treble о О O Reverb О O * Jacks Headphones о О O Over Drive ON/OFF O Reverb ON/OFF O Pre Out O (—4dBm/5.6k.Q) Main In O (~3dBm/47kO) Line Out о О * Power Consumption 23VA 76VA 1Û6VA * Dimensions 305(W)x 324(H) X 155(D)mm 12(W)X12K(H)X 6Vs(D)in. 379(W)x 398(H) x 2Q5(D)mm 14 í£he(W)X 15ПЯН) x8V16