Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Total playing time Disc number (including selected track) SHUFFLE REPEAT 1 ALL 1 DISCS PROGRAM STEP VOLUME SYNC § Track number 6 Press ENTER/NEXT. The track is programmed. The program step number appears, followed by the total playing time. 7 To program additional tracks to be recorded on side A, repeat steps 4 to 6. Skip step 4 to select tracks from the same disc. 8 Press Pon the remote to insert a pause at the end of side A. “P” appears in the display and the total playing time resets to “0.00” in the display. 9 Repeat steps 5 and 6 for tracks from the same disc or steps 4 to 6 for tracks from another disc to program the remaining tracks to be recorded on side B. 10 Press CD SYNC. Deck B stands by for recording and the CD player stands by for playback. The indicator on TAPE B ((for front side) lights up. 11 Press DIRECTION repeatedly to select Ato record on one side. Select §(or RELAY) to record on both sides. 12 Press PPAUSE. Recording starts. To stop recording Press p. To check the order Press CHECK on the remote repeatedly. After the last track, “CHECK END” appears. To cancel Program Edit Press PLAY MODE repeatedly until “PROGRAM” or “SHUFFLE” disappears from the display. Tip When you want to reduce the hiss noise in low-level high-frequency signals, press DOLBY NR so that “DOLBY NR” appears after pressing CD SYNC. Selecting tape length automatically —Tape Select Edit You can check the most suitable tape length for recording a CD. Note that you cannot use Tape Select Edit for discs containing over 20 tracks. 1 Insert a CD. 2 Press FUNCTION repeatedly until “CD” appears in the display. 3 Press EDIT once, so that “EDIT” flashes. The required tape length for the currently selected CD appears, followed by the total playing time for side A and side B respectively. Note You cannot use this function after programming. In order to use this function, you must first cancel the program by pressing PLAY MODE repeatedly until “PROGRAM” or “SHUFFLE” disappears from the display. DJ Effects DJ Effects Looping part of a CD Flashing part of a CD — Loop — Flash With the loop function, you can repeat part of With the flash function, you can “flash” the a CD during playback. This lets you create CD sound during playback. This lets you original recordings. create original recordings. (Power) (Power) LOOP Jog dial FLASH Jog dial /Press and hold LOOP during playback at the point you want to start the Loop function, and release to resume normal play. To adjust the loop length Turn the jog dial while holding LOOP (or press SELECT >or .while holding LOOP on the remote) to select different loop lengths (LOOP 1~20). /Press and hold FLASH during playback at the point you want to start the Flash function, and release to resume normal play. To adjust the flash length Turn the jog dial while holding FLASH (or press SELECT >or .while holding FLASH on the remote) to select different flash lengths (FLASH 1~20). To use LOOP and FLASH together Press and hold both LOOP and FLASH at the same time. Notes • The loop and flash length cannot be adjusted during this operation. Adjust the loop and flash lengths independently beforehand if necessary. • To record the flash effect, use the analog (MD OUT) connections or this unit’s tape deck. Using the drum pads With the drum pads, you can add percussion during playback. This effect can be used with any source, to create original recordings. BEAT (Power) LEVEL Jog dial PAD A PAD B A . A. PAD A PAD B SPEED ?// SELECT >/. /Tap drum PAD A or B to produce the respective sound. To change the drum sound Turn the jog dial while holding PAD A or B (or press SELECT >or .while holding PAD A or B on the remote) to select the sound you desire. You can select from a variety of different drum sounds. The name of the drum sound appears in the display. . KICK < SNARE < • • • > The sound you select will be stored in pad A or B. To create a drum roll Hold down both PAD A and B on the front panel. Turn the jog dial counterclockwise for PAD A or clockwise for PAD B. To adjust the volume of the pads Press BEAT LEVEL repeatedly to select the level you desire. Each time you press the button the level changes as follows: LEVEL 1 /LEVEL 2 /LEVEL 3 /LEVEL MAX /LEVEL 1 . . . /Press BEAT ON/OFF during Using the beat playback at the point you want tofunctions start the beat. The button’s indicator lights up. With the beat functions, you can enjoy a variety of rhythms. They can be used with To change the speed any source, to create original recordings. Turn the jog dial while holding BEAT SPEED (or press SPEED ?or /on the remote) to select the speed you desire (BPM 60~160). BEAT (Power) LEVEL Jog dial To change the beat pattern Turn the jog dial while holding BEAT SELECT (or press SELECT >or .on the remote) to select the pattern you desire. The name of the beat pattern appears in the display. . 8 BEAT 1 < • • • < SLAM > BEAT BEAT BEAT BEAT AUTO BPM ON/OFF SELECT SPEED JAM A . A. BEAT ON/OFF SPEED ?// SELECT >/. To cancel the beat...
Dieses Handbuch ist für folgende Modelle:Stereoanlage - MHC-GRX8 (987.6 kb)
Stereoanlage - MHC-R800 (987.6 kb)
Stereoanlage - MHC-RX99 (987.6 kb)