|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. CAUTION Do not, under any circumstances, place the CD player/Tape deck on top of the Amplifier/Tuner. Laser component in this product is capable of emitting radiation exceeding the limit for Class 1. This appliance is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT MARKING is located on the rear exterior. This caution label is located inside the unit. Welcome! Thank you for purchasing the Sony Mini Hi-Fi Component System. This series is packed with fun features. Here are just a few: •DBFB (Dynamic Bass Feedback) system that boosts low frequency range audio provide deep, powerful bass sound •A preset feature, that lets you store and recall up to 40 (30 for Latin-American and Australian models) of your favorite radio stations •An amplifier that lets you adjust the audio quality to fit a variety of music types and environments •A timer that lets you set the CD player, tape player or radio to turn on and off whenever you want •A dual tape deck that lets you record from the radio, CD player or from the other tape deck and relay play from both decks •A CD player that lets you play up to three CDs in a row and seamlessly advance (or reverse) through all the tracks on all the discs on the CD tray •A music clip feature, that lets you create groups of favorite tracks from your CDs •A remote that lets you control your system from your seat 2 Chapter 1: Setting Up Connecting the Stereo 4 Inserting the Batteries 6 Setting the Clock 6 Table of Contents Chapter 2: the CD Player Playing CDs (normal play) 7 Playing Tracks in Random Order (shuffle play) 8 Playing Tracks in the Desired Order (program play) 9 Playing Tracks Repeatedly (repeat play) 9 Grouping Tracks (music clip) 10 Chapter 3: the Radio Listening to the Radio 11 Presetting Radio Stations 12 Playing Preset Radio Stations 12 Chapter 4: the Tape Player Playing a Tape 13 Recording a CD 14 Recording a CD: Selecting Tape Length Automatically (tape select edit) 14 Recording a CD: Specifying Tape Length (time edit) 15 Recording a CD: Specifying Track Order (program edit) 16 Recording From the Radio 17 Recording From Another Tape (dubbing) 17 Chapter 5: Sound Adjustment Adjusting the Sound 19 Selecting the Audio Emphasis 19 Adjusting the Audio Emphasis 20 Making a Personal Audio Emphasis File (personal file) 20 Chapter 6: Additional Features Falling Asleep to Music 22 Waking Up to Music 22 Timer-Recording Radio Programs 23 Microphone Mixing 24 Karaoke: Singing Along 24 Connecting Optional Equipment 24 For Your Information Precautions 26 Troubleshooting Guide 26 Maintenance 27 Specifications 27 Index to Parts and Controls 28 Index 30 Chapter 1: Setting Up Chapter 1: Setting Up Connecting the Stereo Inserting the Batteries Setting the Clock Connecting the Stereo Use the illustrations below to connect your stereo. If you want to connect any optional components to the stereo, see “Connecting Optional Equipment” in Chapter 6. If you set up the stereo system vertically Be sure to place the Amplifier/Tuner on top of the CD player/Tape Deck. STEP 1 Connecting the Flat Cords Connect the supplied flat cords to SYSTEM CONTROL connectors of the same color by pressing the centre of the flat cord connector until it clicks into place. To disconnect the flat cords Pull out the flat cord connector while pressing in on the sides. Do not pull the flat cord itself. STEP 2 Connecting the Speakers Connect the right speaker to the R connectors and the left speaker to the L connectors with the red cord to + and the black cord to –. LR + – STEP 3 Connecting the Antennas AM loop antenna (supplied) FM 75 AM FM lead antenna* (supplied) *Extend horizontally AM loop antenna connection Connect the supplied loop antenna to the AM and the yterminal. To improve the FM reception Connect an outdoor FM antenna to the FM 75W and yterminals, using a 75-ohm coaxial cable. Important Ground the external antenna from y terminal against lightning. To prevent a gas explosion, do not connect the ground wire to a gas pipe. FM 75 AM Ground wire (not supplied) 75-ohm coaxial cable (not supplied) To improve the AM reception After you connect the AM antenna, connect a 6- to 15-meter insulated wire to the AM terminal. Connect the yterminal to earth. Chapter 1: Setting Up 4 Right speakerSTEP 4 STEP 5 STEP 1 STEP 2 STEP 3 Amplifier/ Tuner CD player/ Tape deck Left speaker to a wall outlet !Do this connection last! FM antenna (supplied) AM loop antenna (supplied) Right speakerSTEP 4 STEP 5 STEP 1 STEP 2 STEP 3 Amplifier/ Tuner CD player/ Tape deck Left speaker to a wall outlet !Do this connection last! FM antenna (supplied) AM loop antenna (supplied) Important Ground the external antenna against lightning from the yterminal. To prevent a gas explosion, do not connect the ground wire to a gas pipe. Insulated wire (not supplied) FM 75 AM Ground wire (not supplied) STEP 4 Adjus...