Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
The transceiver has been adjusted at the factory and should only be readjusted by a qualified technician with proper test equipment. 2 Attempting service or alignment without factory authorization can void the transceiver’s warranty._ CAUTION Long transmissions or extended operation in the HI power mode might cause the rear of this transceiver to get warm. Do not place the transceiver where the heat sink (rear panel) might come in contact with plastic or vinyl surfaces. Use of an external antenna for fixed station is recommended. FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. CONTENTS 1. BEFORE OPERATION ....................................................4 2. SPECIFICATIONS AND ACCESSORIES ........................6 3. BATTERY PACK ............................................................9 4. OPERATION OPERATING CONTROLS ............................................12 RECEIVER OPERATION ..............................................19 TRANSMITTER OPERATION ......................................21 MEMORY ......................................................................23 Microprocessor Memory back-up Microprocessor Initialization Memory Contents Memory Entry Memory Channel Recall Memory Shift Clearing a Memory Channel Automatic Memory Initialization SCAN ............................................................................28 REPEATER OPERATIONS ..........................................32 Transmitter Offsets Reverse Function Tone and CTCSS operation Autopatch Operations CHANNEL DISPLAY MODE ........................................35 TONE ALERT SYSTEM ................................................36 BATTERY SAVER ........................................................36 AUTOMATIC POWER OFF ........................................37 DTMF MEMORY FUNCTION ....................................38 DTSS (Dual Tone Squelch System) ..........................39 5. BLOCK DIAGRAM ........................ insert SCHEMATIC DIAGRAM ................... insert 6. MAINTENANCE ............................. 42 7. OPTIONAL ACCESSORIES ..................... 44 3 1. BEFORE OPERATION TO PREVENT ELECTRIC SHOCK, FIRE AND OTHER INJURY. PLEASE NOTE THE FOLLOWING: Do not place this unit, where it will be exposed to direct sunlight or close to heating appliances. Do not place anything on top of the cabinet. 4 Do not place the unit in areas of excessive dust, high humidity or on unstable surfaces. Do not drop pieces of metal, needles, coins and other electrically conductive materials into the unit. If an abnormal odor or smoke is detected, immediately turn the power off. Contact the KENWOOD service station or your dealer. CLEANING 1. Turn the power off, before cleaning the unit. 2. Do not use any type of abrasive pad, thinner, benzine or any substances which may damage the unit. 3. Wipe the front panel and other exterior surfaces of the unit with a soft dry cloth or a soft cloth lightly moistened with water. 2. SPECIFICATIONS AND ACCESSORIES 2-1. SPECIFICATIONS TH-26A/26AT/26E TH-46A/46AT/46E U.S.A. version 144 — 148 MHz 438 - 450 MHz FREQUENCY RANGE European and U.K. version 144 -146 MHz 430 — 440 MHz Others 144-148 MHz 430 - 440 MHz or 438 - 450 MHz MODE F3E (FM) MEMORY CHANNELS 20+1 (Call Channel) ANTENNA IMPEDANCE 50 a
Boote Zubehör - TH-46A (6.31 mb)
Boote Zubehör - TH-46E (6.31 mb)
Boote Zubehör - TH-66AT (6.31 mb)
Boote Zubehör - TH-26AT (6.31 mb)