Login:
Sortierung : Dateiname ↑   heruntergeladen   Bewertung   Dateigröße ↑  
heruntergeladen wurde: 2   Dateigröße: 742 kb   Hersteller: EnGenius Technologies  
Kategorie: Kreissägen
@name

Insert a #10-32 x 1/2" pan head screw through hole (A) Fig. 13 in the stand and dust chute. Thread a #1032 hex nut onto the screw, and tighten securely. 2. Repeat this process for the remaining holes in the stand. Fig. 13 A 12 ATTACHING THE DOOR TO THE STAND 1. Align the two holes in one of the male hinges (A) Fig. 14 with the two holes on the stand. NOTE: Point the hinge “up” (Fig. 14). 2. From the inside of the stand, insert a #10-24 x 1/2" socket head cap screw through the hole in the stand,





Kategorien