Stimmen - 5, Durchschnittliche Bewertung: 3.2
(
)
)
|
Anleitung Zusammenfassung
To control the direction of the air flow, refer to page 16 and 17. E-15 ENGLISH E-16 Adjusting the Air Flow Direction Vertically Depending on the position of the indoor unit on the wall of your room, you can adjust the position of the outer air flow blade on the bottom of the unit, thus increasing the efficiency of the air conditioner. 1 Press the SWING button one or more times as required. Result: The outer blade is adjusted vertically. RECOMMENDATION When... Adjust the blade to face... Cooling Upwards. Heating Downwards. 2 If you want the blade to move up and down automatically when the air conditioner is operating, press the SWING button. Result: The blade move up and down, around the base position set. 3 To stop the blade moving up and down, press the SWING button again. N NNNNo oooot tttte eeee If you switch the air conditioner... Then the blade is... Off Closed completely. On again Set to the initial position powered. Adjusting the Air Flow Direction Horizontally There are two sets of inner air flow blades. Just as the outer air flow blade can be adjusted vertically, the inner blades can be adjusted horizontally. 1 Adjust each set of inner blades to the required position, by pushing or pulling them sideways. E-17 ENGLISH E-18 Setting the On Timer The On Timer enables you to switch on the air conditioner automatically after a given period of time. You can set the period of time from 30 minutes to 24 hours. 1 To set the operating time, press the ON TIMER button one or more times until the required time is displayed. Possible time is between 0.5 hour and 24 hour inclusive. 2 Press the (Set/Cancel) button to complete the setting. Result: The remaining time is displayed. Blinking of the timer indicator stops. The selected mode and the temperature on the display disappear after 10 seconds. The air conditioner will switch on automatically when the counter displayed on the remote control reaches the set time and disappears the On timer setting. 3 To select an operating mode in advance, press the button until the desired mode is displayed at the top of the remote control. Result: The air conditioner will run in the selected mode when it is turned on. To Cancel the On Timer 1 To cancel the On Timer, press the ON TIMER button one or more times until the timer setting disappears. 2 Press the (Set/Cancel) button. N NNNNo oooot tttte eeee If you want to turn on the air conditioner before the timer reaches the setting time, press the (ON/OFF) button. Setting the Off Timer The Off Timer enables you to switch off the air conditioner automatically after a given period of time. You can set the period of time from 30 minutes to 24 hours. 1 To set the operating time, press the OFF TIMER button one or more times until the required time is displayed. Possible time is between 0.5 hour and 24 hour inclusive. 2 Press the (Set/Cancel) button to complete the setting. Result: The remaining time is displayed. Blinking of the timer indicator stops. The air condit...
Dieses Handbuch ist für folgende Modelle:Splitgeräte - AQ07A1ME (1.31 mb)
Splitgeräte - AQ07A2ME (1.31 mb)
Splitgeräte - AQ07A3ME (1.31 mb)
Splitgeräte - AQ07A4ME (1.31 mb)